lu.se

Elektro- och informationsteknik

Lunds Tekniska Högskola | Lunds universitet

ETI220 Integrerade A/D och D/A omvandlare

Kursinformation

2011/2012


Elective Course for:

E3/E4, D3/D4, Socware and Graduate students

Credits: 6

Prerequisites:

  • Analog Electronics, ESSF01  
  • Strongly recommended: Analog IC Design, ETI063

Course Manager: Associate Prof. Pietro Andreani

Lab Supervisor: PhD students Dejan Radjen and Xiaodong Liu

Literature:

Franco Maloberti, "Data Converters".
ISBN: 978-0387324852

A lab manual is handed out at the first lab seminar.

Course Composition:

  • 12 x 2h lectures
  • 2 x 2h lab seminar
  • 3 lab assignments with 3 x 3h supervised lab time

Examination:

Pass Grade (3):

  • Presence at at least 10 lectures.
  • Presence at at least 3 lab sessions and at the lab seminar.
  • A written lab assignment report per lab group, with your own solutions to the lab assignments.

Higher grade (4 or 5):

  • A written examination is required.

Course Goals:

While digital techniques become undoubtedly efficient, most of the electronic systems still have to deal with analog signals, e.g. the radio channel in a wireless system. High performance A/D and D/A converters are the key building blocks in such a system. It is also desirable to move the analog-digital interface towards the front-end in a software-defined radio. In designing A/D and D/A converters, there are big challenges in speed, dynamic range, area, and power consumption. Embedded A/D and D/A converters become increasingly important due to the trend of system-on-chip. This course is motivated to give the basic knowledge of A/D and D/A converters and also its state-of-the-art development.

Course Contents in brief:

  • Introduction to A/D and D/A conversion
  • A/D and D/A converter specifications
  • Nyquist rate A/D converters
  • Nyquist rate D/A converters
  • Circuit techniques for A/D and D/A converters
  • Delta-Sigma A/D and D/A Conversion
  • Measurement Techniques for A/D and D/A Converters