avr-libc  2.0.0
Standard C library for AVR-GCC

AVR Libc Home Page

AVRs

AVR Libc Development Pages

Main Page

User Manual

Library Reference

FAQ

Example Projects

power.h
Go to the documentation of this file.
1 /* Copyright (c) 2006, 2007, 2008 Eric B. Weddington
2  Copyright (c) 2011 Frédéric Nadeau
3  All rights reserved.
4 
5  Redistribution and use in source and binary forms, with or without
6  modification, are permitted provided that the following conditions are met:
7 
8  * Redistributions of source code must retain the above copyright
9  notice, this list of conditions and the following disclaimer.
10  * Redistributions in binary form must reproduce the above copyright
11  notice, this list of conditions and the following disclaimer in
12  the documentation and/or other materials provided with the
13  distribution.
14  * Neither the name of the copyright holders nor the names of
15  contributors may be used to endorse or promote products derived
16  from this software without specific prior written permission.
17 
18  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
22  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
23  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
24  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
25  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
26  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
28  POSSIBILITY OF SUCH DAMAGE. */
29 
30 /* $Id: power.h 2503 2016-02-07 22:59:47Z joerg_wunsch $ */
31 
32 #ifndef _AVR_POWER_H_
33 #define _AVR_POWER_H_ 1
34 
35 #include <avr/io.h>
36 #include <stdint.h>
37 
38 
39 /** \file */
40 /** \defgroup avr_power <avr/power.h>: Power Reduction Management
41 
42 \code #include <avr/power.h>\endcode
43 
44 Many AVRs contain a Power Reduction Register (PRR) or Registers (PRRx) that
45 allow you to reduce power consumption by disabling or enabling various on-board
46 peripherals as needed. Some devices have the XTAL Divide Control Register
47 (XDIV) which offer similar functionality as System Clock Prescale
48 Register (CLKPR).
49 
50 There are many macros in this header file that provide an easy interface
51 to enable or disable on-board peripherals to reduce power. See the table below.
52 
53 \note Not all AVR devices have a Power Reduction Register (for example
54 the ATmega8). On those devices without a Power Reduction Register, the
55 power reduction macros are not available..
56 
57 \note Not all AVR devices contain the same peripherals (for example, the LCD
58 interface), or they will be named differently (for example, USART and
59 USART0). Please consult your device's datasheet, or the header file, to
60 find out which macros are applicable to your device.
61 
62 \note For device using the XTAL Divide Control Register (XDIV), when prescaler
63 is used, Timer/Counter0 can only be used in asynchronous mode. Keep in mind
64 that Timer/Counter0 source shall be less than ¼th of peripheral clock.
65 Therefore, when using a typical 32.768 kHz crystal, one shall not scale
66 the clock below 131.072 kHz.
67 
68 */
69 
70 
71 /** \addtogroup avr_power
72 
73 \anchor avr_powermacros
74 <small>
75 <center>
76 <table border="3">
77  <tr>
78  <td width="10%"><strong>Power Macro</strong></td>
79  <td width="15%"><strong>Description</strong></td>
80  </tr>
81 
82  <tr>
83  <td>power_aca_disable()</td>
84  <td>Disable the Analog Comparator on PortA.</td>
85  </tr>
86 
87  <tr>
88  <td>power_aca_enable()</td>
89  <td>Enable the Analog Comparator on PortA.</td>
90  </tr>
91 
92  <tr>
93  <td>power_adc_enable()</td>
94  <td>Enable the Analog to Digital Converter module.</td>
95  </tr>
96 
97  <tr>
98  <td>power_adc_disable()</td>
99  <td>Disable the Analog to Digital Converter module.</td>
100  </tr>
101 
102  <tr>
103  <td>power_adca_disable()</td>
104  <td>Disable the Analog to Digital Converter module on PortA</td>
105  </tr>
106 
107  <tr>
108  <td>power_adca_enable()</td>
109  <td>Enable the Analog to Digital Converter module on PortA</td>
110  </tr>
111 
112  <tr>
113  <td>power_evsys_disable()</td>
114  <td>Disable the EVSYS module</td>
115  </tr>
116 
117  <tr>
118  <td>power_evsys_enable()</td>
119  <td>Enable the EVSYS module</td>
120  </tr>
121 
122  <tr>
123  <td>power_hiresc_disable()</td>
124  <td>Disable the HIRES module on PortC</td>
125  </tr>
126 
127  <tr>
128  <td>power_hiresc_enable()</td>
129  <td>Enable the HIRES module on PortC</td>
130  </tr>
131 
132  <tr>
133  <td>power_lcd_enable()</td>
134  <td>Enable the LCD module.</td>
135  </tr>
136 
137  <tr>
138  <td>power_lcd_disable().</td>
139  <td>Disable the LCD module.</td>
140  </tr>
141 
142  <tr>
143  <td>power_pga_enable()</td>
144  <td>Enable the Programmable Gain Amplifier module.</td>
145  </tr>
146 
147  <tr>
148  <td>power_pga_disable()</td>
149  <td>Disable the Programmable Gain Amplifier module.</td>
150  </tr>
151 
152  <tr>
153  <td>power_pscr_enable()</td>
154  <td>Enable the Reduced Power Stage Controller module.</td>
155  </tr>
156 
157  <tr>
158  <td>power_pscr_disable()</td>
159  <td>Disable the Reduced Power Stage Controller module.</td>
160  </tr>
161 
162  <tr>
163  <td>power_psc0_enable()</td>
164  <td>Enable the Power Stage Controller 0 module.</td>
165  </tr>
166 
167  <tr>
168  <td>power_psc0_disable()</td>
169  <td>Disable the Power Stage Controller 0 module.</td>
170  </tr>
171 
172  <tr>
173  <td>power_psc1_enable()</td>
174  <td>Enable the Power Stage Controller 1 module.</td>
175  </tr>
176 
177  <tr>
178  <td>power_psc1_disable()</td>
179  <td>Disable the Power Stage Controller 1 module.</td>
180  </tr>
181 
182  <tr>
183  <td>power_psc2_enable()</td>
184  <td>Enable the Power Stage Controller 2 module.</td>
185  </tr>
186 
187  <tr>
188  <td>power_psc2_disable()</td>
189  <td>Disable the Power Stage Controller 2 module.</td>
190  </tr>
191 
192  <tr>
193  <td>power_ram0_enable()</td>
194  <td>Enable the SRAM block 0 .</td>
195  </tr>
196 
197  <tr>
198  <td>power_ram0_disable()</td>
199  <td>Disable the SRAM block 0. </td>
200  </tr>
201 
202  <tr>
203  <td>power_ram1_enable()</td>
204  <td>Enable the SRAM block 1 .</td>
205  </tr>
206 
207  <tr>
208  <td>power_ram1_disable()</td>
209  <td>Disable the SRAM block 1. </td>
210  </tr>
211 
212  <tr>
213  <td>power_ram2_enable()</td>
214  <td>Enable the SRAM block 2 .</td>
215  </tr>
216 
217  <tr>
218  <td>power_ram2_disable()</td>
219  <td>Disable the SRAM block 2. </td>
220  </tr>
221 
222  <tr>
223  <td>power_ram3_enable()</td>
224  <td>Enable the SRAM block 3 .</td>
225  </tr>
226 
227  <tr>
228  <td>power_ram3_disable()</td>
229  <td>Disable the SRAM block 3. </td>
230  </tr>
231 
232  <tr>
233  <td>power_rtc_disable()</td>
234  <td>Disable the RTC module</td>
235  </tr>
236 
237  <tr>
238  <td>power_rtc_enable()</td>
239  <td>Enable the RTC module</td>
240  </tr>
241 
242  <tr>
243  <td>power_spi_enable()</td>
244  <td>Enable the Serial Peripheral Interface module.</td>
245  </tr>
246 
247  <tr>
248  <td>power_spi_disable()</td>
249  <td>Disable the Serial Peripheral Interface module.</td>
250  </tr>
251 
252  <tr>
253  <td>power_spic_disable()</td>
254  <td>Disable the SPI module on PortC</td>
255  </tr>
256 
257  <tr>
258  <td>power_spic_enable()</td>
259  <td>Enable the SPI module on PortC</td>
260  </tr>
261 
262  <tr>
263  <td>power_spid_disable()</td>
264  <td>Disable the SPI module on PortD</td>
265  </tr>
266 
267  <tr>
268  <td>power_spid_enable()</td>
269  <td>Enable the SPI module on PortD</td>
270  </tr>
271 
272  <tr>
273  <td>power_tc0c_disable()</td>
274  <td>Disable the TC0 module on PortC</td>
275  </tr>
276 
277  <tr>
278  <td>power_tc0c_enable()</td>
279  <td>Enable the TC0 module on PortC</td>
280  </tr>
281 
282  <tr>
283  <td>power_tc0d_disable()</td>
284  <td>Disable the TC0 module on PortD</td>
285  </tr>
286 
287  <tr>
288  <td>power_tc0d_enable()</td>
289  <td>Enable the TC0 module on PortD</td>
290  </tr>
291 
292  <tr>
293  <td>power_tc0e_disable()</td>
294  <td>Disable the TC0 module on PortE</td>
295  </tr>
296 
297  <tr>
298  <td>power_tc0e_enable()</td>
299  <td>Enable the TC0 module on PortE</td>
300  </tr>
301 
302  <tr>
303  <td>power_tc0f_disable()</td>
304  <td>Disable the TC0 module on PortF</td>
305  </tr>
306 
307  <tr>
308  <td>power_tc0f_enable()</td>
309  <td>Enable the TC0 module on PortF</td>
310  </tr>
311 
312  <tr>
313  <td>power_tc1c_disable()</td>
314  <td>Disable the TC1 module on PortC</td>
315  </tr>
316 
317  <tr>
318  <td>power_tc1c_enable()</td>
319  <td>Enable the TC1 module on PortC</td>
320  </tr>
321 
322  <tr>
323  <td>power_twic_disable()</td>
324  <td>Disable the Two Wire Interface module on PortC</td>
325  </tr>
326 
327  <tr>
328  <td>power_twic_enable()</td>
329  <td>Enable the Two Wire Interface module on PortC</td>
330  </tr>
331 
332  <tr>
333  <td>power_twie_disable()</td>
334  <td>Disable the Two Wire Interface module on PortE</td>
335  </tr>
336 
337  <tr>
338  <td>power_twie_enable()</td>
339  <td>Enable the Two Wire Interface module on PortE</td>
340  </tr>
341 
342  <tr>
343  <td>power_timer0_enable()</td>
344  <td>Enable the Timer 0 module.</td>
345  </tr>
346 
347  <tr>
348  <td>power_timer0_disable()</td>
349  <td>Disable the Timer 0 module.</td>
350  </tr>
351 
352  <tr>
353  <td>power_timer1_enable()</td>
354  <td>Enable the Timer 1 module.</td>
355  </tr>
356 
357  <tr>
358  <td>power_timer1_disable()</td>
359  <td>Disable the Timer 1 module.</td>
360  </tr>
361 
362  <tr>
363  <td>power_timer2_enable()</td>
364  <td>Enable the Timer 2 module.</td>
365  </tr>
366 
367  <tr>
368  <td>power_timer2_disable()</td>
369  <td>Disable the Timer 2 module.</td>
370  </tr>
371 
372  <tr>
373  <td>power_timer3_enable()</td>
374  <td>Enable the Timer 3 module.</td>
375  </tr>
376 
377  <tr>
378  <td>power_timer3_disable()</td>
379  <td>Disable the Timer 3 module.</td>
380  </tr>
381 
382  <tr>
383  <td>power_timer4_enable()</td>
384  <td>Enable the Timer 4 module.</td>
385  </tr>
386 
387  <tr>
388  <td>power_timer4_disable()</td>
389  <td>Disable the Timer 4 module.</td>
390  </tr>
391 
392  <tr>
393  <td>power_timer5_enable()</td>
394  <td>Enable the Timer 5 module.</td>
395  </tr>
396 
397  <tr>
398  <td>power_timer5_disable()</td>
399  <td>Disable the Timer 5 module.</td>
400  </tr>
401 
402  <tr>
403  <td>power_twi_enable()</td>
404  <td>Enable the Two Wire Interface module.</td>
405  </tr>
406 
407  <tr>
408  <td>power_twi_disable()</td>
409  <td>Disable the Two Wire Interface module.</td>
410  </tr>
411 
412  <tr>
413  <td>power_usart_enable()</td>
414  <td>Enable the USART module.</td>
415  </tr>
416 
417  <tr>
418  <td>power_usart_disable()</td>
419  <td>Disable the USART module.</td>
420  </tr>
421 
422  <tr>
423  <td>power_usart0_enable()</td>
424  <td>Enable the USART 0 module.</td>
425  </tr>
426 
427  <tr>
428  <td>power_usart0_disable()</td>
429  <td>Disable the USART 0 module.</td>
430  </tr>
431 
432  <tr>
433  <td>power_usart1_enable()</td>
434  <td>Enable the USART 1 module.</td>
435  </tr>
436 
437  <tr>
438  <td>power_usart1_disable()</td>
439  <td>Disable the USART 1 module.</td>
440  </tr>
441 
442  <tr>
443  <td>power_usart2_enable()</td>
444  <td>Enable the USART 2 module.</td>
445  </tr>
446 
447  <tr>
448  <td>power_usart2_disable()</td>
449  <td>Disable the USART 2 module.</td>
450  </tr>
451 
452  <tr>
453  <td>power_usart3_enable()</td>
454  <td>Enable the USART 3 module.</td>
455  </tr>
456 
457  <tr>
458  <td>power_usart3_disable()</td>
459  <td>Disable the USART 3 module.</td>
460  </tr>
461 
462  <tr>
463  <td>power_usartc0_disable()</td>
464  <td> Disable the USART0 module on PortC</td>
465  </tr>
466 
467  <tr>
468  <td>power_usartc0_enable()</td>
469  <td> Enable the USART0 module on PortC</td>
470  </tr>
471 
472  <tr>
473  <td>power_usartd0_disable()</td>
474  <td> Disable the USART0 module on PortD</td>
475  </tr>
476 
477  <tr>
478  <td>power_usartd0_enable()</td>
479  <td> Enable the USART0 module on PortD</td>
480  </tr>
481 
482  <tr>
483  <td>power_usarte0_disable()</td>
484  <td> Disable the USART0 module on PortE</td>
485  </tr>
486 
487  <tr>
488  <td>power_usarte0_enable()</td>
489  <td> Enable the USART0 module on PortE</td>
490  </tr>
491 
492  <tr>
493  <td>power_usartf0_disable()</td>
494  <td> Disable the USART0 module on PortF</td>
495  </tr>
496 
497  <tr>
498  <td>power_usartf0_enable()</td>
499  <td> Enable the USART0 module on PortF</td>
500  </tr>
501 
502  <tr>
503  <td>power_usb_enable()</td>
504  <td>Enable the USB module.</td>
505  </tr>
506 
507  <tr>
508  <td>power_usb_disable()</td>
509  <td>Disable the USB module.</td>
510  </tr>
511 
512  <tr>
513  <td>power_usi_enable()</td>
514  <td>Enable the Universal Serial Interface module.</td>
515  </tr>
516 
517  <tr>
518  <td>power_usi_disable()</td>
519  <td>Disable the Universal Serial Interface module.</td>
520  </tr>
521 
522  <tr>
523  <td>power_vadc_enable()</td>
524  <td>Enable the Voltage ADC module.</td>
525  </tr>
526 
527  <tr>
528  <td>power_vadc_disable()</td>
529  <td>Disable the Voltage ADC module.</td>
530  </tr>
531 
532  <tr>
533  <td>power_all_enable()</td>
534  <td>Enable all modules.</td>
535  </tr>
536 
537  <tr>
538  <td>power_all_disable()</td>
539  <td>Disable all modules.</td>
540  </tr>
541 </table>
542 </center>
543 </small>
544 
545 @} */
546 
547 #if defined(__AVR_HAVE_PRR_PRADC)
548 #define power_adc_enable() (PRR &= (uint8_t)~(1 << PRADC))
549 #define power_adc_disable() (PRR |= (uint8_t)(1 << PRADC))
550 #endif
551 
552 #if defined(__AVR_HAVE_PRR_PRCAN)
553 #define power_can_enable() (PRR &= (uint8_t)~(1 << PRCAN))
554 #define power_can_disable() (PRR |= (uint8_t)(1 << PRCAN))
555 #endif
556 
557 #if defined(__AVR_HAVE_PRR_PRLCD)
558 #define power_lcd_enable() (PRR &= (uint8_t)~(1 << PRLCD))
559 #define power_lcd_disable() (PRR |= (uint8_t)(1 << PRLCD))
560 #endif
561 
562 #if defined(__AVR_HAVE_PRR_PRLIN)
563 #define power_lin_enable() (PRR &= (uint8_t)~(1 << PRLIN))
564 #define power_lin_disable() (PRR |= (uint8_t)(1 << PRLIN))
565 #endif
566 
567 #if defined(__AVR_HAVE_PRR_PRPSC)
568 #define power_psc_enable() (PRR &= (uint8_t)~(1 << PRPSC))
569 #define power_psc_disable() (PRR |= (uint8_t)(1 << PRPSC))
570 #endif
571 
572 #if defined(__AVR_HAVE_PRR_PRPSC0)
573 #define power_psc0_enable() (PRR &= (uint8_t)~(1 << PRPSC0))
574 #define power_psc0_disable() (PRR |= (uint8_t)(1 << PRPSC0))
575 #endif
576 
577 #if defined(__AVR_HAVE_PRR_PRPSC1)
578 #define power_psc1_enable() (PRR &= (uint8_t)~(1 << PRPSC1))
579 #define power_psc1_disable() (PRR |= (uint8_t)(1 << PRPSC1))
580 #endif
581 
582 #if defined(__AVR_HAVE_PRR_PRPSC2)
583 #define power_psc2_enable() (PRR &= (uint8_t)~(1 << PRPSC2))
584 #define power_psc2_disable() (PRR |= (uint8_t)(1 << PRPSC2))
585 #endif
586 
587 #if defined(__AVR_HAVE_PRR_PRSCR)
588 #define power_pscr_enable() (PRR &= (uint8_t)~(1 << PRPSCR))
589 #define power_pscr_disable() (PRR |= (uint8_t)(1 << PRPSCR))
590 #endif
591 
592 #if defined(__AVR_HAVE_PRR_PRSPI)
593 #define power_spi_enable() (PRR &= (uint8_t)~(1 << PRSPI))
594 #define power_spi_disable() (PRR |= (uint8_t)(1 << PRSPI))
595 #endif
596 
597 #if defined(__AVR_HAVE_PRR_PRTIM0)
598 #define power_timer0_enable() (PRR &= (uint8_t)~(1 << PRTIM0))
599 #define power_timer0_disable() (PRR |= (uint8_t)(1 << PRTIM0))
600 #endif
601 
602 #if defined(__AVR_HAVE_PRR_PRTIM1)
603 #define power_timer1_enable() (PRR &= (uint8_t)~(1 << PRTIM1))
604 #define power_timer1_disable() (PRR |= (uint8_t)(1 << PRTIM1))
605 #endif
606 
607 #if defined(__AVR_HAVE_PRR_PRTIM2)
608 #define power_timer2_enable() (PRR &= (uint8_t)~(1 << PRTIM2))
609 #define power_timer2_disable() (PRR |= (uint8_t)(1 << PRTIM2))
610 #endif
611 
612 #if defined(__AVR_HAVE_PRR_PRTWI)
613 #define power_twi_enable() (PRR &= (uint8_t)~(1 << PRTWI))
614 #define power_twi_disable() (PRR |= (uint8_t)(1 << PRTWI))
615 #endif
616 
617 #if defined(__AVR_HAVE_PRR_PRUSART)
618 #define power_usart_enable() (PRR &= (uint8_t)~(1 << PRUSART))
619 #define power_usart_disable() (PRR |= (uint8_t)(1 << PRUSART))
620 #endif
621 
622 #if defined(__AVR_HAVE_PRR_PRUSART0)
623 #define power_usart0_enable() (PRR &= (uint8_t)~(1 << PRUSART0))
624 #define power_usart0_disable() (PRR |= (uint8_t)(1 << PRUSART0))
625 #endif
626 
627 #if defined(__AVR_HAVE_PRR_PRUSART1)
628 #define power_usart1_enable() (PRR &= (uint8_t)~(1 << PRUSART1))
629 #define power_usart1_disable() (PRR |= (uint8_t)(1 << PRUSART1))
630 #endif
631 
632 #if defined(__AVR_HAVE_PRR_PRUSI)
633 #define power_usi_enable() (PRR &= (uint8_t)~(1 << PRUSI))
634 #define power_usi_disable() (PRR |= (uint8_t)(1 << PRUSI))
635 #endif
636 
637 #if defined(__AVR_HAVE_PRR0_PRADC)
638 #define power_adc_enable() (PRR0 &= (uint8_t)~(1 << PRADC))
639 #define power_adc_disable() (PRR0 |= (uint8_t)(1 << PRADC))
640 #endif
641 
642 #if defined(__AVR_HAVE_PRR0_PRC0)
643 #define power_clock_output_enable() (PRR0 &= (uint8_t)~(1 << PRCO))
644 #define power_clock_output_disable() (PRR0 |= (uint8_t)(1 << PRCO))
645 #endif
646 
647 #if defined(__AVR_HAVE_PRR0_PRCRC)
648 #define power_crc_enable() (PRR0 &= (uint8_t)~(1 << PRCRC))
649 #define power_crc_disable() (PRR0 |= (uint8_t)(1 << PRCRC))
650 #endif
651 
652 #if defined(__AVR_HAVE_PRR0_PRCU)
653 #define power_crypto_enable() (PRR0 &= (uint8_t)~(1 << PRCU))
654 #define power_crypto_disable() (PRR0 |= (uint8_t)(1 << PRCU))
655 #endif
656 
657 #if defined(__AVR_HAVE_PRR0_PRDS)
658 #define power_irdriver_enable() (PRR0 &= (uint8_t)~(1 << PRDS))
659 #define power_irdriver_disable() (PRR0 |= (uint8_t)(1 << PRDS))
660 #endif
661 
662 #if defined(__AVR_HAVE_PRR0_PRLFR)
663 #define power_lfreceiver_enable() (PRR0 &= (uint8_t)~(1 << PRLFR))
664 #define power_lfreceiver_disable() (PRR0 |= (uint8_t)(1 << PRLFR))
665 #endif
666 
667 #if defined(__AVR_HAVE_PRR0_PRLIN)
668 #define power_lin_enable() (PRR0 &= (uint8_t)~(1 << PRLIN))
669 #define power_lin_disable() (PRR0 |= (uint8_t)(1 << PRLIN))
670 #endif
671 
672 #if defined(__AVR_HAVE_PRR0_PRPGA)
673 #define power_pga_enable() (PRR0 &= (uint8_t)~(1 << PRPGA))
674 #define power_pga_disable() (PRR0 |= (uint8_t)(1 << PRPGA))
675 #endif
676 
677 #if defined(__AVR_HAVE_PRR0_PRRXDC)
678 #define power_receive_dsp_control_enable() (PRR0 &= (uint8_t)~(1 << PRRXDC))
679 #define power_receive_dsp_control_disable() (PRR0 |= (uint8_t)(1 << PRRXDC))
680 #endif
681 
682 #if defined(__AVR_HAVE_PRR0_PRSPI)
683 #define power_spi_enable() (PRR0 &= (uint8_t)~(1 << PRSPI))
684 #define power_spi_disable() (PRR0 |= (uint8_t)(1 << PRSPI))
685 #endif
686 
687 #if defined(__AVR_HAVE_PRR0_PRT0)
688 #define power_timer0_enable() (PRR0 &= (uint8_t)~(1 << PRT0))
689 #define power_timer0_disable() (PRR0 |= (uint8_t)(1 << PRT0))
690 #endif
691 
692 #if defined(__AVR_HAVE_PRR0_PRTIM0)
693 #define power_timer0_enable() (PRR0 &= (uint8_t)~(1 << PRTIM0))
694 #define power_timer0_disable() (PRR0 |= (uint8_t)(1 << PRTIM0))
695 #endif
696 
697 #if defined(__AVR_HAVE_PRR0_PRT1)
698 #define power_timer1_enable() (PRR0 &= (uint8_t)~(1 << PRT1))
699 #define power_timer1_disable() (PRR0 |= (uint8_t)(1 << PRT1))
700 #endif
701 
702 #if defined(__AVR_HAVE_PRR0_PRTIM1)
703 #define power_timer1_enable() (PRR0 &= (uint8_t)~(1 << PRTIM1))
704 #define power_timer1_disable() (PRR0 |= (uint8_t)(1 << PRTIM1))
705 #endif
706 
707 #if defined(__AVR_HAVE_PRR0_PRT2)
708 #define power_timer2_enable() (PRR0 &= (uint8_t)~(1 << PRT2))
709 #define power_timer2_disable() (PRR0 |= (uint8_t)(1 << PRT2))
710 #endif
711 
712 #if defined(__AVR_HAVE_PRR0_PRTIM2)
713 #define power_timer2_enable() (PRR0 &= (uint8_t)~(1 << PRTIM2))
714 #define power_timer2_disable() (PRR0 |= (uint8_t)(1 << PRTIM2))
715 #endif
716 
717 #if defined(__AVR_HAVE_PRR0_PRT3)
718 #define power_timer3_enable() (PRR0 &= (uint8_t)~(1 << PRT3))
719 #define power_timer3_disable() (PRR0 |= (uint8_t)(1 << PRT3))
720 #endif
721 
722 #if defined(__AVR_HAVE_PRR0_PRTM)
723 #define power_timermodulator_enable() (PRR0 &= (uint8_t)~(1 << PRTM))
724 #define power_timermodulator_disable() (PRR0 |= (uint8_t)(1 << PRTM))
725 #endif
726 
727 #if defined(__AVR_HAVE_PRR0_PRTWI)
728 #define power_twi_enable() (PRR0 &= (uint8_t)~(1 << PRTWI))
729 #define power_twi_disable() (PRR0 |= (uint8_t)(1 << PRTWI))
730 #endif
731 
732 #if defined(__AVR_HAVE_PRR0_PRTXDC)
733 #define power_transmit_dsp_control_enable() (PRR0 &= (uint8_t)~(1 << PRTXDC))
734 #define power_transmit_dsp_control_disable() (PRR0 |= (uint8_t)(1 << PRTXDC))
735 #endif
736 
737 #if defined(__AVR_HAVE_PRR0_PRUSART0)
738 #define power_usart0_enable() (PRR0 &= (uint8_t)~(1 << PRUSART0))
739 #define power_usart0_disable() (PRR0 |= (uint8_t)(1 << PRUSART0))
740 #endif
741 
742 #if defined(__AVR_HAVE_PRR0_PRUSART1)
743 #define power_usart1_enable() (PRR0 &= (uint8_t)~(1 << PRUSART1))
744 #define power_usart1_disable() (PRR0 |= (uint8_t)(1 << PRUSART1))
745 #endif
746 
747 #if defined(__AVR_HAVE_PRR0_PRVADC)
748 #define power_vadc_enable() (PRR0 &= (uint8_t)~(1 << PRVADC))
749 #define power_vadc_disable() (PRR0 |= (uint8_t)(1 << PRVADC))
750 #endif
751 
752 #if defined(__AVR_HAVE_PRR0_PRVM)
753 #define power_voltage_monitor_enable() (PRR0 &= (uint8_t)~(1 << PRVM))
754 #define power_voltage_monitor_disable() (PRR0 |= (uint8_t)(1 << PRVM))
755 #endif
756 
757 #if defined(__AVR_HAVE_PRR0_PRVRM)
758 #define power_vrm_enable() (PRR0 &= (uint8_t)~(1 << PRVRM))
759 #define power_vrm_disable() (PRR0 |= (uint8_t)(1 << PRVRM))
760 #endif
761 
762 #if defined(__AVR_HAVE_PRR1_PRAES)
763 #define power_aes_enable() (PRR1 &= (uint8_t)~(1 << PRAES))
764 #define power_aes_disable() (PRR1 |= (uint8_t)(1 << PRAES))
765 #endif
766 
767 #if defined(__AVR_HAVE_PRR1_PRCI)
768 #define power_cinterface_enable() (PRR1 &= (uint8_t)~(1 << PRCI))
769 #define power_cinterface_disable() (PRR1 |= (uint8_t)(1 << PRCI))
770 #endif
771 
772 #if defined(__AVR_HAVE_PRR1_PRHSSPI)
773 #define power_hsspi_enable() (PRR1 &= (uint8_t)~(1 << PRHSSPI))
774 #define power_hsspi_disable() (PRR1 |= (uint8_t)(1 << PRHSSPI))
775 #endif
776 
777 #if defined(__AVR_HAVE_PRR1_PRKB)
778 #define power_kb_enable() (PRR1 &= (uint8_t)~(1 << PRKB))
779 #define power_kb_disable() (PRR1 |= (uint8_t)(1 << PRKB))
780 #endif
781 
782 #if defined(__AVR_HAVE_PRR1_PRLFR)
783 #define power_lfreceiver_enable() (PRR1 &= (uint8_t)~(1 << PRLFR))
784 #define power_lfreceiver_disable() (PRR1 |= (uint8_t)(1 << PRLFR))
785 #endif
786 
787 #if defined(__AVR_HAVE_PRR1_PRSCI)
788 #define power_sci_enable() (PRR1 &= (uint8_t)~(1 << PRSCI))
789 #define power_sci_disable() (PRR1 |= (uint8_t)(1 << PRSCI))
790 #endif
791 
792 #if defined(__AVR_HAVE_PRR1_PRT1)
793 #define power_timer1_enable() (PRR1 &= (uint8_t)~(1 << PRT1))
794 #define power_timer1_disable() (PRR1 |= (uint8_t)(1 << PRT1))
795 #endif
796 
797 #if defined(__AVR_HAVE_PRR1_PRT2)
798 #define power_timer2_enable() (PRR1 &= (uint8_t)~(1 << PRT2))
799 #define power_timer2_disable() (PRR1 |= (uint8_t)(1 << PRT2))
800 #endif
801 
802 #if defined(__AVR_HAVE_PRR1_PRT3)
803 #define power_timer3_enable() (PRR1 &= (uint8_t)~(1 << PRT3))
804 #define power_timer3_disable() (PRR1 |= (uint8_t)(1 << PRT3))
805 #endif
806 
807 #if defined(__AVR_HAVE_PRR1_PRT4)
808 #define power_timer4_enable() (PRR1 &= (uint8_t)~(1 << PRT4))
809 #define power_timer4_disable() (PRR1 |= (uint8_t)(1 << PRT4))
810 #endif
811 
812 #if defined(__AVR_HAVE_PRR1_PRT5)
813 #define power_timer5_enable() (PRR1 &= (uint8_t)~(1 << PRT5))
814 #define power_timer5_disable() (PRR1 |= (uint8_t)(1 << PRT5))
815 #endif
816 
817 #if defined(__AVR_HAVE_PRR1_PRTIM3)
818 #define power_timer3_enable() (PRR1 &= (uint8_t)~(1 << PRTIM3))
819 #define power_timer3_disable() (PRR1 |= (uint8_t)(1 << PRTIM3))
820 #endif
821 
822 #if defined(__AVR_HAVE_PRR1_PRTIM4)
823 #define power_timer4_enable() (PRR1 &= (uint8_t)~(1 << PRTIM4))
824 #define power_timer4_disable() (PRR1 |= (uint8_t)(1 << PRTIM4))
825 #endif
826 
827 #if defined(__AVR_HAVE_PRR1_PRTIM5)
828 #define power_timer5_enable() (PRR1 &= (uint8_t)~(1 << PRTIM5))
829 #define power_timer5_disable() (PRR1 |= (uint8_t)(1 << PRTIM5))
830 #endif
831 
832 #if defined(__AVR_HAVE_PRR1_PRTRX24)
833 #define power_transceiver_enable() (PRR1 &= (uint8_t)~(1 << PRTRX24))
834 #define power_transceiver_disable() (PRR1 |= (uint8_t)(1 << PRTRX24))
835 #endif
836 
837 #if defined(__AVR_HAVE_PRR1_PRUSART1)
838 #define power_usart1_enable() (PRR1 &= (uint8_t)~(1 << PRUSART1))
839 #define power_usart1_disable() (PRR1 |= (uint8_t)(1 << PRUSART1))
840 #endif
841 
842 #if defined(__AVR_HAVE_PRR1_PRUSART2)
843 #define power_usart2_enable() (PRR1 &= (uint8_t)~(1 << PRUSART2))
844 #define power_usart2_disable() (PRR1 |= (uint8_t)(1 << PRUSART2))
845 #endif
846 
847 #if defined(__AVR_HAVE_PRR1_PRUSB)
848 #define power_usb_enable() (PRR1 &= (uint8_t)~(1 << PRUSB))
849 #define power_usb_disable() (PRR1 |= (uint8_t)(1 << PRUSB))
850 #endif
851 
852 #if defined(__AVR_HAVE_PRR1_PRUSBH)
853 #define power_usbh_enable() (PRR1 &= (uint8_t)~(1 << PRUSBH))
854 #define power_usbh_disable() (PRR1 |= (uint8_t)(1 << PRUSBH))
855 #endif
856 
857 #if defined(__AVR_HAVE_PRR2_PRDF)
858 #define power_data_fifo_enable() (PRR2 &= (uint8_t)~(1 << PRDF))
859 #define power_data_fifo_disable() (PRR2 |= (uint8_t)(1 << PRDF))
860 #endif
861 
862 #if defined(__AVR_HAVE_PRR2_PRIDS)
863 #define power_id_scan_enable() (PRR2 &= (uint8_t)~(1 << PRIDS))
864 #define power_id_scan_disable() (PRR2 |= (uint8_t)(1 << PRIDS))
865 #endif
866 
867 #if defined(__AVR_HAVE_PRR2_PRRAM0)
868 #define power_ram0_enable() (PRR2 &= (uint8_t)~(1 << PRRAM0))
869 #define power_ram0_disable() (PRR2 |= (uint8_t)(1 << PRRAM0))
870 #endif
871 
872 #if defined(__AVR_HAVE_PRR2_PRRAM1)
873 #define power_ram1_enable() (PRR2 &= (uint8_t)~(1 << PRRAM1))
874 #define power_ram1_disable() (PRR2 |= (uint8_t)(1 << PRRAM1))
875 #endif
876 
877 #if defined(__AVR_HAVE_PRR2_PRRAM2)
878 #define power_ram2_enable() (PRR2 &= (uint8_t)~(1 << PRRAM2))
879 #define power_ram2_disable() (PRR2 |= (uint8_t)(1 << PRRAM2))
880 #endif
881 
882 #if defined(__AVR_HAVE_PRR2_PRRAM3)
883 #define power_ram3_enable() (PRR2 &= (uint8_t)~(1 << PRRAM3))
884 #define power_ram3_disable() (PRR2 |= (uint8_t)(1 << PRRAM3))
885 #endif
886 
887 #if defined(__AVR_HAVE_PRR2_PRRS)
888 #define power_rssi_buffer_enable() (PRR2 &= (uint8_t)~(1 << PRRS))
889 #define power_rssi_buffer_disable() (PRR2 |= (uint8_t)(1 << PRRS))
890 #endif
891 
892 #if defined(__AVR_HAVE_PRR2_PRSF)
893 #define power_preamble_rssi_fifo_enable() (PRR2 &= (uint8_t)~(1 << PRSF))
894 #define power_preamble_rssi_fifo_disable() (PRR2 |= (uint8_t)(1 << PRSF))
895 #endif
896 
897 #if defined(__AVR_HAVE_PRR2_PRSSM)
898 #define power_sequencer_state_machine_enable() (PRR2 &= (uint8_t)~(1 << PRSSM))
899 #define power_sequencer_state_machine_disable() (PRR2 |= (uint8_t)(1 << PRSSM))
900 #endif
901 
902 #if defined(__AVR_HAVE_PRR2_PRTM)
903 #define power_tx_modulator_enable() (PRR2 &= (uint8_t)~(1 << PRTM))
904 #define power_tx_modulator_disable() (PRR2 |= (uint8_t)(1 << PRTM))
905 #endif
906 
907 #if defined(__AVR_HAVE_PRR2_PRXA)
908 #define power_rx_buffer_A_enable() (PRR2 &= (uint8_t)~(1 << PRXA))
909 #define power_rx_buffer_A_disable() (PRR2 |= (uint8_t)(1 << PRXA))
910 #endif
911 
912 #if defined(__AVR_HAVE_PRR2_PRXB)
913 #define power_rx_buffer_B_enable() (PRR2 &= (uint8_t)~(1 << PRXB))
914 #define power_rx_buffer_B_disable() (PRR2 |= (uint8_t)(1 << PRXB))
915 #endif
916 
917 #if defined(__AVR_HAVE_PRGEN_AES)
918 #define power_aes_enable() (PR_PRGEN &= (uint8_t)~(PR_AES_bm))
919 #define power_aes_disable() (PR_PRGEN |= (uint8_t)PR_AES_bm)
920 #endif
921 
922 #if defined(__AVR_HAVE_PRGEN_DMA)
923 #define power_dma_enable() (PR_PRGEN &= (uint8_t)~(PR_DMA_bm))
924 #define power_dma_disable() (PR_PRGEN |= (uint8_t)PR_DMA_bm)
925 #endif
926 
927 #if defined(__AVR_HAVE_PRGEN_EBI)
928 #define power_ebi_enable() (PR_PRGEN &= (uint8_t)~(PR_EBI_bm))
929 #define power_ebi_disable() (PR_PRGEN |= (uint8_t)PR_EBI_bm)
930 #endif
931 
932 #if defined(__AVR_HAVE_PRGEN_EDMA)
933 #define power_edma_enable() (PR_PRGEN &= (uint8_t)~(PR_EDMA_bm))
934 #define power_edma_disable() (PR_PRGEN |= (uint8_t)PR_EDMA_bm)
935 #endif
936 
937 #if defined(__AVR_HAVE_PRGEN_EVSYS)
938 #define power_evsys_enable() (PR_PRGEN &= (uint8_t)~(PR_EVSYS_bm))
939 #define power_evsys_disable() (PR_PRGEN |= (uint8_t)PR_EVSYS_bm)
940 #endif
941 
942 #if defined(__AVR_HAVE_PRGEN_LCD)
943 #define power_lcd_enable() (PR_PRGEN &= (uint8_t)~(PR_LCD_bm))
944 #define power_lcd_disable() (PR_PRGEN |= (uint8_t)PR_LCD_bm)
945 #endif
946 
947 #if defined(__AVR_HAVE_PRGEN_RTC)
948 #define power_rtc_enable() (PR_PRGEN &= (uint8_t)~(PR_RTC_bm))
949 #define power_rtc_disable() (PR_PRGEN |= (uint8_t)PR_RTC_bm)
950 #endif
951 
952 #if defined(__AVR_HAVE_PRGEN_USB)
953 #define power_usb_enable() (PR_PRGEN &= (uint8_t)~(PR_USB_bm))
954 #define power_usb_disable() (PR_PRGEN &= (uint8_t)(PR_USB_bm))
955 #endif
956 
957 #if defined(__AVR_HAVE_PRGEN_XCL)
958 #define power_xcl_enable() (PR_PRGEN &= (uint8_t)~(PR_XCL_bm))
959 #define power_xcl_disable() (PR_PRGEN |= (uint8_t)PR_XCL_bm)
960 #endif
961 
962 #if defined(__AVR_HAVE_PRPA_AC)
963 #define power_aca_enable() (PR_PRPA &= (uint8_t)~(PR_AC_bm))
964 #define power_aca_disable() (PR_PRPA |= (uint8_t)PR_AC_bm)
965 #endif
966 
967 #if defined(__AVR_HAVE_PRPA_ADC)
968 #define power_adca_enable() (PR_PRPA &= (uint8_t)~(PR_ADC_bm))
969 #define power_adca_disable() (PR_PRPA |= (uint8_t)PR_ADC_bm)
970 #endif
971 
972 #if defined(__AVR_HAVE_PRPA_DAC)
973 #define power_daca_enable() (PR_PRPA &= (uint8_t)~(PR_DAC_bm))
974 #define power_daca_disable() (PR_PRPA |= (uint8_t)PR_DAC_bm)
975 #endif
976 
977 #if defined(__AVR_HAVE_PRPB_AC)
978 #define power_acb_enable() (PR_PRPB &= (uint8_t)~(PR_AC_bm))
979 #define power_acb_disable() (PR_PRPB |= (uint8_t)PR_AC_bm)
980 #endif
981 
982 #if defined(__AVR_HAVE_PRPB_ADC)
983 #define power_adcb_enable() (PR_PRPB &= (uint8_t)~(PR_ADC_bm))
984 #define power_adcb_disable() (PR_PRPB |= (uint8_t)PR_ADC_bm)
985 #endif
986 
987 #if defined(__AVR_HAVE_PRPB_DAC)
988 #define power_dacb_enable() (PR_PRPB &= (uint8_t)~(PR_DAC_bm))
989 #define power_dacb_disable() (PR_PRPB |= (uint8_t)PR_DAC_bm)
990 #endif
991 
992 #if defined(__AVR_HAVE_PRPC_HIRES)
993 #define power_hiresc_enable() (PR_PRPC &= (uint8_t)~(PR_HIRES_bm))
994 #define power_hiresc_disable() (PR_PRPC |= (uint8_t)PR_HIRES_bm)
995 #endif
996 
997 #if defined(__AVR_HAVE_PRPC_SPI)
998 #define power_spic_enable() (PR_PRPC &= (uint8_t)~(PR_SPI_bm))
999 #define power_spic_disable() (PR_PRPC |= (uint8_t)PR_SPI_bm)
1000 #endif
1001 
1002 #if defined(__AVR_HAVE_PRPC_TC0)
1003 #define power_tc0c_enable() (PR_PRPC &= (uint8_t)~(PR_TC0_bm))
1004 #define power_tc0c_disable() (PR_PRPC |= (uint8_t)PR_TC0_bm)
1005 #endif
1006 
1007 #if defined(__AVR_HAVE_PRPC_TC1)
1008 #define power_tc1c_enable() (PR_PRPC &= (uint8_t)~(PR_TC1_bm))
1009 #define power_tc1c_disable() (PR_PRPC |= (uint8_t)PR_TC1_bm)
1010 #endif
1011 
1012 #if defined(__AVR_HAVE_PRPC_TC4)
1013 #define power_tc4c_enable() (PR_PRPC &= (uint8_t)~(PR_TC4_bm))
1014 #define power_tc4c_disable() (PR_PRPC |= (uint8_t)PR_TC4_bm)
1015 #endif
1016 
1017 #if defined(__AVR_HAVE_PRPC_TC5)
1018 #define power_tc5c_enable() (PR_PRPC &= (uint8_t)~(PR_TC5_bm))
1019 #define power_tc5c_disable() (PR_PRPC |= (uint8_t)PR_TC5_bm)
1020 #endif
1021 
1022 #if defined(__AVR_HAVE_PRPC_TWI)
1023 #define power_twic_enable() (PR_PRPC &= (uint8_t)~(PR_TWI_bm))
1024 #define power_twic_disable() (PR_PRPC |= (uint8_t)PR_TWI_bm)
1025 #endif
1026 
1027 #if defined(__AVR_HAVE_PRPC_USART0)
1028 #define power_usartc0_enable() (PR_PRPC &= (uint8_t)~(PR_USART0_bm))
1029 #define power_usartc0_disable() (PR_PRPC |= (uint8_t)PR_USART0_bm)
1030 #endif
1031 
1032 #if defined(__AVR_HAVE_PRPC_USART1)
1033 #define power_usartc1_enable() (PR_PRPC &= (uint8_t)~(PR_USART1_bm))
1034 #define power_usartc1_disable() (PR_PRPC |= (uint8_t)PR_USART1_bm)
1035 #endif
1036 
1037 #if defined(__AVR_HAVE_PRPD_HIRES)
1038 #define power_hiresd_enable() (PR_PRPD &= (uint8_t)~(PR_HIRES_bm))
1039 #define power_hiresd_disable() (PR_PRPD |= (uint8_t)PR_HIRES_bm)
1040 #endif
1041 
1042 #if defined(__AVR_HAVE_PRPD_SPI)
1043 #define power_spid_enable() (PR_PRPD &= (uint8_t)~(PR_SPI_bm))
1044 #define power_spid_disable() (PR_PRPD |= (uint8_t)PR_SPI_bm)
1045 #endif
1046 
1047 #if defined(__AVR_HAVE_PRPD_TC0)
1048 #define power_tc0d_enable() (PR_PRPD &= (uint8_t)~(PR_TC0_bm))
1049 #define power_tc0d_disable() (PR_PRPD |= (uint8_t)PR_TC0_bm)
1050 #endif
1051 
1052 #if defined(__AVR_HAVE_PRPD_TC1)
1053 #define power_tc1d_enable() (PR_PRPD &= (uint8_t)~(PR_TC1_bm))
1054 #define power_tc1d_disable() (PR_PRPD |= (uint8_t)PR_TC1_bm)
1055 #endif
1056 
1057 #if defined(__AVR_HAVE_PRPD_TC5)
1058 #define power_tc5d_enable() (PR_PRPD &= (uint8_t)~(PR_TC5_bm))
1059 #define power_tc5d_disable() (PR_PRPD |= (uint8_t)PR_TC5_bm)
1060 #endif
1061 
1062 #if defined(__AVR_HAVE_PRPD_TWI)
1063 #define power_twid_enable() (PR_PRPD &= (uint8_t)~(PR_TWI_bm))
1064 #define power_twid_disable() (PR_PRPD |= (uint8_t)PR_TWI_bm)
1065 #endif
1066 
1067 #if defined(__AVR_HAVE_PRPD_USART0)
1068 #define power_usartd0_enable() (PR_PRPD &= (uint8_t)~(PR_USART0_bm))
1069 #define power_usartd0_disable() (PR_PRPD |= (uint8_t)PR_USART0_bm)
1070 #endif
1071 
1072 #if defined(__AVR_HAVE_PRPD_USART1)
1073 #define power_usartd1_enable() (PR_PRPD &= (uint8_t)~(PR_USART1_bm))
1074 #define power_usartd1_disable() (PR_PRPD |= (uint8_t)PR_USART1_bm)
1075 #endif
1076 
1077 #if defined(__AVR_HAVE_PRPE_HIRES)
1078 #define power_hirese_enable() (PR_PRPE &= (uint8_t)~(PR_HIRES_bm))
1079 #define power_hirese_disable() (PR_PRPE |= (uint8_t)PR_HIRES_bm)
1080 #endif
1081 
1082 #if defined(__AVR_HAVE_PRPE_SPI)
1083 #define power_spie_enable() (PR_PRPE &= (uint8_t)~(PR_SPI_bm))
1084 #define power_spie_disable() (PR_PRPE |= (uint8_t)PR_SPI_bm)
1085 #endif
1086 
1087 #if defined(__AVR_HAVE_PRPE_TC0)
1088 #define power_tc0e_enable() (PR_PRPE &= (uint8_t)~(PR_TC0_bm))
1089 #define power_tc0e_disable() (PR_PRPE |= (uint8_t)PR_TC0_bm)
1090 #endif
1091 
1092 #if defined(__AVR_HAVE_PRPE_TC1)
1093 #define power_tc1e_enable() (PR_PRPE &= (uint8_t)~(PR_TC1_bm))
1094 #define power_tc1e_disable() (PR_PRPE |= (uint8_t)PR_TC1_bm)
1095 #endif
1096 
1097 #if defined(__AVR_HAVE_PRPE_TWI)
1098 #define power_twie_enable() (PR_PRPE &= (uint8_t)~(PR_TWI_bm))
1099 #define power_twie_disable() (PR_PRPE |= (uint8_t)PR_TWI_bm)
1100 #endif
1101 
1102 #if defined(__AVR_HAVE_PRPE_USART0)
1103 #define power_usarte0_enable() (PR_PRPE &= (uint8_t)~(PR_USART0_bm))
1104 #define power_usarte0_disable() (PR_PRPE |= (uint8_t)PR_USART0_bm)
1105 #endif
1106 
1107 #if defined(__AVR_HAVE_PRPE_USART1)
1108 #define power_usarte1_enable() (PR_PRPE &= (uint8_t)~(PR_USART1_bm))
1109 #define power_usarte1_disable() (PR_PRPE |= (uint8_t)PR_USART1_bm)
1110 #endif
1111 
1112 #if defined(__AVR_HAVE_PRPF_HIRES)
1113 #define power_hiresf_enable() (PR_PRPF &= (uint8_t)~(PR_HIRES_bm))
1114 #define power_hiresf_disable() (PR_PRPF |= (uint8_t)PR_HIRES_bm)
1115 #endif
1116 
1117 #if defined(__AVR_HAVE_PRPF_SPI)
1118 #define power_spif_enable() (PR_PRPF &= (uint8_t)~(PR_SPI_bm))
1119 #define power_spif_disable() (PR_PRPF |= (uint8_t)PR_SPI_bm)
1120 #endif
1121 
1122 #if defined(__AVR_HAVE_PRPF_TC0)
1123 #define power_tc0f_enable() (PR_PRPF &= (uint8_t)~(PR_TC0_bm))
1124 #define power_tc0f_disable() (PR_PRPF |= (uint8_t)PR_TC0_bm)
1125 #endif
1126 
1127 #if defined(__AVR_HAVE_PRPF_TC1)
1128 #define power_tc1f_enable() (PR_PRPF &= (uint8_t)~(PR_TC1_bm))
1129 #define power_tc1f_disable() (PR_PRPF |= (uint8_t)PR_TC1_bm)
1130 #endif
1131 
1132 #if defined(__AVR_HAVE_PRPF_TWI)
1133 #define power_twif_enable() (PR_PRPF &= (uint8_t)~(PR_TWI_bm))
1134 #define power_twif_disable() (PR_PRPF |= (uint8_t)PR_TWI_bm)
1135 #endif
1136 
1137 #if defined(__AVR_HAVE_PRPF_USART0)
1138 #define power_usartf0_enable() (PR_PRPF &= (uint8_t)~(PR_USART0_bm))
1139 #define power_usartf0_disable() (PR_PRPF |= (uint8_t)PR_USART0_bm)
1140 #endif
1141 
1142 #if defined(__AVR_HAVE_PRPF_USART1)
1143 #define power_usartf1_enable() (PR_PRPF &= (uint8_t)~(PR_USART1_bm))
1144 #define power_usartf1_disable() (PR_PRPF |= (uint8_t)PR_USART1_bm)
1145 #endif
1146 
1147 static __inline void
1148 __attribute__ ((__always_inline__))
1149 __power_all_enable()
1150 {
1151 #ifdef __AVR_HAVE_PRR
1152  PRR &= (uint8_t)~(__AVR_HAVE_PRR);
1153 #endif
1154 
1155 #ifdef __AVR_HAVE_PRR0
1156  PRR0 &= (uint8_t)~(__AVR_HAVE_PRR0);
1157 #endif
1158 
1159 #ifdef __AVR_HAVE_PRR1
1160  PRR1 &= (uint8_t)~(__AVR_HAVE_PRR1);
1161 #endif
1162 
1163 #ifdef __AVR_HAVE_PRR2
1164  PRR2 &= (uint8_t)~(__AVR_HAVE_PRR2);
1165 #endif
1166 
1167 #ifdef __AVR_HAVE_PRGEN
1168  PR_PRGEN &= (uint8_t)~(__AVR_HAVE_PRGEN);
1169 #endif
1170 
1171 #ifdef __AVR_HAVE_PRPA
1172  PR_PRPA &= (uint8_t)~(__AVR_HAVE_PRPA);
1173 #endif
1174 
1175 #ifdef __AVR_HAVE_PRPB
1176  PR_PRPB &= (uint8_t)~(__AVR_HAVE_PRPB);
1177 #endif
1178 
1179 #ifdef __AVR_HAVE_PRPC
1180  PR_PRPC &= (uint8_t)~(__AVR_HAVE_PRPC);
1181 #endif
1182 
1183 #ifdef __AVR_HAVE_PRPD
1184  PR_PRPD &= (uint8_t)~(__AVR_HAVE_PRPD);
1185 #endif
1186 
1187 #ifdef __AVR_HAVE_PRPE
1188  PR_PRPE &= (uint8_t)~(__AVR_HAVE_PRPE);
1189 #endif
1190 
1191 #ifdef __AVR_HAVE_PRPF
1192  PR_PRPF &= (uint8_t)~(__AVR_HAVE_PRPF);
1193 #endif
1194 }
1195 
1196 static __inline void
1197 __attribute__ ((__always_inline__))
1198 __power_all_disable()
1199 {
1200 #ifdef __AVR_HAVE_PRR
1201  PRR |= (uint8_t)(__AVR_HAVE_PRR);
1202 #endif
1203 
1204 #ifdef __AVR_HAVE_PRR0
1205  PRR0 |= (uint8_t)(__AVR_HAVE_PRR0);
1206 #endif
1207 
1208 #ifdef __AVR_HAVE_PRR1
1209  PRR1 |= (uint8_t)(__AVR_HAVE_PRR1);
1210 #endif
1211 
1212 #ifdef __AVR_HAVE_PRR2
1213  PRR2 |= (uint8_t)(__AVR_HAVE_PRR2);
1214 #endif
1215 
1216 #ifdef __AVR_HAVE_PRGEN
1217  PR_PRGEN |= (uint8_t)(__AVR_HAVE_PRGEN);
1218 #endif
1219 
1220 #ifdef __AVR_HAVE_PRPA
1221  PR_PRPA |= (uint8_t)(__AVR_HAVE_PRPA);
1222 #endif
1223 
1224 #ifdef __AVR_HAVE_PRPB
1225  PR_PRPB |= (uint8_t)(__AVR_HAVE_PRPB);
1226 #endif
1227 
1228 #ifdef __AVR_HAVE_PRPC
1229  PR_PRPC |= (uint8_t)(__AVR_HAVE_PRPC);
1230 #endif
1231 
1232 #ifdef __AVR_HAVE_PRPD
1233  PR_PRPD |= (uint8_t)(__AVR_HAVE_PRPD);
1234 #endif
1235 
1236 #ifdef __AVR_HAVE_PRPE
1237  PR_PRPE |= (uint8_t)(__AVR_HAVE_PRPE);
1238 #endif
1239 
1240 #ifdef __AVR_HAVE_PRPF
1241  PR_PRPF |= (uint8_t)(__AVR_HAVE_PRPF);
1242 #endif
1243 }
1244 
1245 #ifndef __DOXYGEN__
1246 #ifndef power_all_enable
1247 #define power_all_enable() __power_all_enable()
1248 #endif
1249 
1250 #ifndef power_all_disable
1251 #define power_all_disable() __power_all_disable()
1252 #endif
1253 #endif /* !__DOXYGEN__ */
1254 
1255 
1256 #if defined(__AVR_AT90CAN32__) \
1257 || defined(__AVR_AT90CAN64__) \
1258 || defined(__AVR_AT90CAN128__) \
1259 || defined(__AVR_AT90PWM1__) \
1260 || defined(__AVR_AT90PWM2__) \
1261 || defined(__AVR_AT90PWM2B__) \
1262 || defined(__AVR_AT90PWM3__) \
1263 || defined(__AVR_AT90PWM3B__) \
1264 || defined(__AVR_AT90PWM81__) \
1265 || defined(__AVR_AT90PWM161__) \
1266 || defined(__AVR_AT90PWM216__) \
1267 || defined(__AVR_AT90PWM316__) \
1268 || defined(__AVR_AT90SCR100__) \
1269 || defined(__AVR_AT90USB646__) \
1270 || defined(__AVR_AT90USB647__) \
1271 || defined(__AVR_AT90USB82__) \
1272 || defined(__AVR_AT90USB1286__) \
1273 || defined(__AVR_AT90USB1287__) \
1274 || defined(__AVR_AT90USB162__) \
1275 || defined(__AVR_ATA5505__) \
1276 || defined(__AVR_ATA5272__) \
1277 || defined(__AVR_ATmega1280__) \
1278 || defined(__AVR_ATmega1281__) \
1279 || defined(__AVR_ATmega1284__) \
1280 || defined(__AVR_ATmega128RFA1__) \
1281 || defined(__AVR_ATmega1284RFR2__) \
1282 || defined(__AVR_ATmega128RFR2__) \
1283 || defined(__AVR_ATmega1284P__) \
1284 || defined(__AVR_ATmega162__) \
1285 || defined(__AVR_ATmega164A__) \
1286 || defined(__AVR_ATmega164P__) \
1287 || defined(__AVR_ATmega164PA__) \
1288 || defined(__AVR_ATmega165__) \
1289 || defined(__AVR_ATmega165A__) \
1290 || defined(__AVR_ATmega165P__) \
1291 || defined(__AVR_ATmega165PA__) \
1292 || defined(__AVR_ATmega168__) \
1293 || defined(__AVR_ATmega168P__) \
1294 || defined(__AVR_ATmega168PA__) \
1295 || defined(__AVR_ATmega169__) \
1296 || defined(__AVR_ATmega169A__) \
1297 || defined(__AVR_ATmega169P__) \
1298 || defined(__AVR_ATmega169PA__) \
1299 || defined(__AVR_ATmega16U4__) \
1300 || defined(__AVR_ATmega2560__) \
1301 || defined(__AVR_ATmega2561__) \
1302 || defined(__AVR_ATmega2564RFR2__) \
1303 || defined(__AVR_ATmega256RFR2__) \
1304 || defined(__AVR_ATmega324A__) \
1305 || defined(__AVR_ATmega324P__) \
1306 || defined(__AVR_ATmega325__) \
1307 || defined(__AVR_ATmega325A__) \
1308 || defined(__AVR_ATmega325PA__) \
1309 || defined(__AVR_ATmega3250__) \
1310 || defined(__AVR_ATmega3250A__) \
1311 || defined(__AVR_ATmega3250PA__) \
1312 || defined(__AVR_ATmega328__) \
1313 || defined(__AVR_ATmega328P__) \
1314 || defined(__AVR_ATmega329__) \
1315 || defined(__AVR_ATmega329A__) \
1316 || defined(__AVR_ATmega329P__) \
1317 || defined(__AVR_ATmega329PA__) \
1318 || defined(__AVR_ATmega3290__) \
1319 || defined(__AVR_ATmega3290A__) \
1320 || defined(__AVR_ATmega3290PA__) \
1321 || defined(__AVR_ATmega32C1__) \
1322 || defined(__AVR_ATmega32M1__) \
1323 || defined(__AVR_ATmega32U2__) \
1324 || defined(__AVR_ATmega32U4__) \
1325 || defined(__AVR_ATmega32U6__) \
1326 || defined(__AVR_ATmega48__) \
1327 || defined(__AVR_ATmega48A__) \
1328 || defined(__AVR_ATmega48PA__) \
1329 || defined(__AVR_ATmega48P__) \
1330 || defined(__AVR_ATmega640__) \
1331 || defined(__AVR_ATmega649P__) \
1332 || defined(__AVR_ATmega644__) \
1333 || defined(__AVR_ATmega644A__) \
1334 || defined(__AVR_ATmega644P__) \
1335 || defined(__AVR_ATmega644PA__) \
1336 || defined(__AVR_ATmega645__) \
1337 || defined(__AVR_ATmega645A__) \
1338 || defined(__AVR_ATmega645P__) \
1339 || defined(__AVR_ATmega6450__) \
1340 || defined(__AVR_ATmega6450A__) \
1341 || defined(__AVR_ATmega6450P__) \
1342 || defined(__AVR_ATmega649__) \
1343 || defined(__AVR_ATmega649A__) \
1344 || defined(__AVR_ATmega6490__) \
1345 || defined(__AVR_ATmega6490A__) \
1346 || defined(__AVR_ATmega6490P__) \
1347 || defined(__AVR_ATmega644RFR2__) \
1348 || defined(__AVR_ATmega64RFR2__) \
1349 || defined(__AVR_ATmega88__) \
1350 || defined(__AVR_ATmega88P__) \
1351 || defined(__AVR_ATmega8U2__) \
1352 || defined(__AVR_ATmega16U2__) \
1353 || defined(__AVR_ATmega32U2__) \
1354 || defined(__AVR_ATtiny48__) \
1355 || defined(__AVR_ATtiny167__) \
1356 || defined(__DOXYGEN__)
1357 
1358 
1359 /** \addtogroup avr_power
1360 
1361 Some of the newer AVRs contain a System Clock Prescale Register (CLKPR) that
1362 allows you to decrease the system clock frequency and the power consumption
1363 when the need for processing power is low.
1364 On some earlier AVRs (ATmega103, ATmega64, ATmega128), similar
1365 functionality can be achieved through the XTAL Divide Control Register.
1366 Below are two macros and an enumerated type that can be used to
1367 interface to the Clock Prescale Register or
1368 XTAL Divide Control Register.
1369 
1370 \note Not all AVR devices have a clock prescaler. On those devices
1371 without a Clock Prescale Register or XTAL Divide Control Register, these
1372 macros are not available.
1373 */
1374 
1375 
1376 /** \addtogroup avr_power
1377 \code
1378 typedef enum
1379 {
1380  clock_div_1 = 0,
1381  clock_div_2 = 1,
1382  clock_div_4 = 2,
1383  clock_div_8 = 3,
1384  clock_div_16 = 4,
1385  clock_div_32 = 5,
1386  clock_div_64 = 6,
1387  clock_div_128 = 7,
1388  clock_div_256 = 8,
1389  clock_div_1_rc = 15, // ATmega128RFA1 only
1390 } clock_div_t;
1391 \endcode
1392 Clock prescaler setting enumerations for device using
1393 System Clock Prescale Register.
1394 
1395 \code
1396 typedef enum
1397 {
1398  clock_div_1 = 1,
1399  clock_div_2 = 2,
1400  clock_div_4 = 4,
1401  clock_div_8 = 8,
1402  clock_div_16 = 16,
1403  clock_div_32 = 32,
1404  clock_div_64 = 64,
1405  clock_div_128 = 128
1406 } clock_div_t;
1407 \endcode
1408 Clock prescaler setting enumerations for device using
1409 XTAL Divide Control Register.
1410 
1411 */
1412 #ifndef __DOXYGEN__
1413 typedef enum
1414 {
1415  clock_div_1 = 0,
1416  clock_div_2 = 1,
1417  clock_div_4 = 2,
1418  clock_div_8 = 3,
1419  clock_div_16 = 4,
1420  clock_div_32 = 5,
1421  clock_div_64 = 6,
1422  clock_div_128 = 7,
1423  clock_div_256 = 8
1424 #if defined(__AVR_ATmega128RFA1__) \
1425 || defined(__AVR_ATmega2564RFR2__) \
1426 || defined(__AVR_ATmega1284RFR2__) \
1427 || defined(__AVR_ATmega644RFR2__) \
1428 || defined(__AVR_ATmega256RFR2__) \
1429 || defined(__AVR_ATmega128RFR2__) \
1430 || defined(__AVR_ATmega64RFR2__)
1431  , clock_div_1_rc = 15
1432 #endif
1433 } clock_div_t;
1434 
1435 static __inline__ void clock_prescale_set(clock_div_t) __attribute__((__always_inline__));
1436 #endif /* !__DOXYGEN__ */
1437 
1438 /**
1439  \ingroup avr_power
1440  \fn clock_prescale_set(clock_div_t x)
1441 
1442 Set the clock prescaler register select bits, selecting a system clock
1443 division setting. This function is inlined, even if compiler
1444 optimizations are disabled.
1445 
1446 The type of \c x is \c clock_div_t.
1447 
1448 \note For device with XTAL Divide Control Register (XDIV), \c x can actually range
1449 from 1 to 129. Thus, one does not need to use \c clock_div_t type as argument.
1450 */
1451 void clock_prescale_set(clock_div_t __x)
1452 {
1453  uint8_t __tmp = _BV(CLKPCE);
1454  __asm__ __volatile__ (
1455  "in __tmp_reg__,__SREG__" "\n\t"
1456  "cli" "\n\t"
1457  "sts %1, %0" "\n\t"
1458  "sts %1, %2" "\n\t"
1459  "out __SREG__, __tmp_reg__"
1460  : /* no outputs */
1461  : "d" (__tmp),
1462  "M" (_SFR_MEM_ADDR(CLKPR)),
1463  "d" (__x)
1464  : "r0");
1465 }
1466 
1467 /** \addtogroup avr_power
1468 \def clock_prescale_get()
1469 Gets and returns the clock prescaler register setting. The return type is \c clock_div_t.
1470 
1471 \note For device with XTAL Divide Control Register (XDIV), return can actually
1472 range from 1 to 129. Care should be taken has the return value could differ from the
1473 typedef enum clock_div_t. This should only happen if clock_prescale_set was previously
1474 called with a value other than those defined by \c clock_div_t.
1475 */
1476 #define clock_prescale_get() (clock_div_t)(CLKPR & (uint8_t)((1<<CLKPS0)|(1<<CLKPS1)|(1<<CLKPS2)|(1<<CLKPS3)))
1477 
1478 #elif defined(__AVR_ATmega16HVB__) \
1479 || defined(__AVR_ATmega16HVBREVB__) \
1480 || defined(__AVR_ATmega32HVB__) \
1481 || defined(__AVR_ATmega32HVBREVB__)
1482 
1483 typedef enum
1484 {
1485  clock_div_1 = 0,
1486  clock_div_2 = 1,
1487  clock_div_4 = 2,
1488  clock_div_8 = 3
1489 } clock_div_t;
1490 
1491 static __inline__ void clock_prescale_set(clock_div_t) __attribute__((__always_inline__));
1492 
1493 void clock_prescale_set(clock_div_t __x)
1494 {
1495  uint8_t __tmp = _BV(CLKPCE);
1496  __asm__ __volatile__ (
1497  "in __tmp_reg__,__SREG__" "\n\t"
1498  "cli" "\n\t"
1499  "sts %1, %0" "\n\t"
1500  "sts %1, %2" "\n\t"
1501  "out __SREG__, __tmp_reg__"
1502  : /* no outputs */
1503  : "d" (__tmp),
1504  "M" (_SFR_MEM_ADDR(CLKPR)),
1505  "d" (__x)
1506  : "r0");
1507 }
1508 
1509 #define clock_prescale_get() (clock_div_t)(CLKPR & (uint8_t)((1<<CLKPS0)|(1<<CLKPS1)))
1510 
1511 #elif defined(__AVR_ATA5790__) \
1512 || defined (__AVR_ATA5795__)
1513 
1514 typedef enum
1515 {
1516  clock_div_1 = 0,
1517  clock_div_2 = 1,
1518  clock_div_4 = 2,
1519  clock_div_8 = 3,
1520  clock_div_16 = 4,
1521  clock_div_32 = 5,
1522  clock_div_64 = 6,
1523  clock_div_128 = 7,
1524 } clock_div_t;
1525 
1526 static __inline__ void system_clock_prescale_set(clock_div_t) __attribute__((__always_inline__));
1527 
1528 void system_clock_prescale_set(clock_div_t __x)
1529 {
1530  uint8_t __tmp = _BV(CLKPCE);
1531  __asm__ __volatile__ (
1532  "in __tmp_reg__,__SREG__" "\n\t"
1533  "cli" "\n\t"
1534  "out %1, %0" "\n\t"
1535  "out %1, %2" "\n\t"
1536  "out __SREG__, __tmp_reg__"
1537  : /* no outputs */
1538  : "d" (__tmp),
1539  "I" (_SFR_IO_ADDR(CLKPR)),
1540  "d" (__x)
1541  : "r0");
1542 }
1543 
1544 #define system_clock_prescale_get() (clock_div_t)(CLKPR & (uint8_t)((1<<CLKPS0)|(1<<CLKPS1)|(1<<CLKPS2)))
1545 
1546 typedef enum
1547 {
1548  timer_clock_div_reset = 0,
1549  timer_clock_div_1 = 1,
1550  timer_clock_div_2 = 2,
1551  timer_clock_div_4 = 3,
1552  timer_clock_div_8 = 4,
1553  timer_clock_div_16 = 5,
1554  timer_clock_div_32 = 6,
1555  timer_clock_div_64 = 7
1556 } timer_clock_div_t;
1557 
1558 static __inline__ void timer_clock_prescale_set(timer_clock_div_t) __attribute__((__always_inline__));
1559 
1560 void timer_clock_prescale_set(timer_clock_div_t __x)
1561 {
1562  uint8_t __t;
1563  __asm__ __volatile__ (
1564  "in __tmp_reg__,__SREG__" "\n\t"
1565  "cli" "\n\t"
1566  "in %[temp],%[clkpr]" "\n\t"
1567  "out %[clkpr],%[enable]" "\n\t"
1568  "andi %[temp],%[not_CLTPS]" "\n\t"
1569  "or %[temp], %[set_value]" "\n\t"
1570  "out %[clkpr],%[temp]" "\n\t"
1571  "sei" "\n\t"
1572  "out __SREG__,__tmp_reg__" "\n\t"
1573  : /* no outputs */
1574  : [temp] "r" (__t),
1575  [clkpr] "I" (_SFR_IO_ADDR(CLKPR)),
1576  [enable] "r" (_BV(CLKPCE)),
1577  [not_CLTPS] "M" (0xFF & (~ ((1 << CLTPS2) | (1 << CLTPS1) | (1 << CLTPS0)))),
1578  [set_value] "r" ((__x & 7) << 3)
1579  : "r0");
1580 }
1581 
1582 #define timer_clock_prescale_get() (timer_clock_div_t)(CLKPR & (uint8_t)((1<<CLTPS0)|(1<<CLTPS1)|(1<<CLTPS2)))
1583 
1584 #elif defined(__AVR_ATA6285__) \
1585 || defined(__AVR_ATA6286__)
1586 
1587 typedef enum
1588 {
1589  clock_div_1 = 0,
1590  clock_div_2 = 1,
1591  clock_div_4 = 2,
1592  clock_div_8 = 3,
1593  clock_div_16 = 4,
1594  clock_div_32 = 5,
1595  clock_div_64 = 6,
1596  clock_div_128 = 7
1597 } clock_div_t;
1598 
1599 static __inline__ void system_clock_prescale_set(clock_div_t) __attribute__((__always_inline__));
1600 
1601 void system_clock_prescale_set(clock_div_t __x)
1602 {
1603  uint8_t __t;
1604  __asm__ __volatile__ (
1605  "in __tmp_reg__,__SREG__" "\n\t"
1606  "cli" "\n\t"
1607  "in %[temp],%[clpr]" "\n\t"
1608  "out %[clpr],%[enable]" "\n\t"
1609  "andi %[temp],%[not_CLKPS]" "\n\t"
1610  "or %[temp], %[set_value]" "\n\t"
1611  "out %[clpr],%[temp]" "\n\t"
1612  "sei" "\n\t"
1613  "out __SREG__,__tmp_reg__" "\n\t"
1614  : /* no outputs */
1615  : [temp] "r" (__t),
1616  [clpr] "I" (_SFR_IO_ADDR(CLKPR)),
1617  [enable] "r" _BV(CLPCE),
1618  [not_CLKPS] "M" (0xFF & (~ ((1 << CLKPS2) | (1 << CLKPS1) | (1 << CLKPS0)))),
1619  [set_value] "r" (__x & 7)
1620  : "r0");
1621 }
1622 
1623 #define system_clock_prescale_get() (clock_div_t)(CLKPR & (uint8_t)((1<<CLKPS0)|(1<<CLKPS1)|(1<<CLKPS2)))
1624 
1625 typedef enum
1626 {
1627  timer_clock_div_reset = 0,
1628  timer_clock_div_1 = 1,
1629  timer_clock_div_2 = 2,
1630  timer_clock_div_4 = 3,
1631  timer_clock_div_8 = 4,
1632  timer_clock_div_16 = 5,
1633  timer_clock_div_32 = 6,
1634  timer_clock_div_64 = 7
1635 } timer_clock_div_t;
1636 
1637 static __inline__ void timer_clock_prescale_set(timer_clock_div_t) __attribute__((__always_inline__));
1638 
1639 void timer_clock_prescale_set(timer_clock_div_t __x)
1640 {
1641  uint8_t __t;
1642  __asm__ __volatile__ (
1643  "in __tmp_reg__,__SREG__" "\n\t"
1644  "cli" "\n\t"
1645  "in %[temp],%[clpr]" "\n\t"
1646  "out %[clpr],%[enable]" "\n\t"
1647  "andi %[temp],%[not_CLTPS]" "\n\t"
1648  "or %[temp], %[set_value]" "\n\t"
1649  "out %[clpr],%[temp]" "\n\t"
1650  "sei" "\n\t"
1651  "out __SREG__,__tmp_reg__" "\n\t"
1652  : /* no outputs */
1653  : [temp] "r" (__t),
1654  [clpr] "I" (_SFR_IO_ADDR(CLKPR)),
1655  [enable] "r" (_BV(CLPCE)),
1656  [not_CLTPS] "M" (0xFF & (~ ((1 << CLTPS2) | (1 << CLTPS1) | (1 << CLTPS0)))),
1657  [set_value] "r" ((__x & 7) << 3)
1658  : "r0");
1659 }
1660 
1661 #define timer_clock_prescale_get() (timer_clock_div_t)(CLKPR & (uint8_t)((1<<CLTPS0)|(1<<CLTPS1)|(1<<CLTPS2)))
1662 
1663 #elif defined(__AVR_ATtiny24__) \
1664 || defined(__AVR_ATtiny24A__) \
1665 || defined(__AVR_ATtiny44__) \
1666 || defined(__AVR_ATtiny44A__) \
1667 || defined(__AVR_ATtiny84__) \
1668 || defined(__AVR_ATtiny84A__) \
1669 || defined(__AVR_ATtiny25__) \
1670 || defined(__AVR_ATtiny45__) \
1671 || defined(__AVR_ATtiny85__) \
1672 || defined(__AVR_ATtiny261A__) \
1673 || defined(__AVR_ATtiny261__) \
1674 || defined(__AVR_ATtiny461__) \
1675 || defined(__AVR_ATtiny461A__) \
1676 || defined(__AVR_ATtiny861__) \
1677 || defined(__AVR_ATtiny861A__) \
1678 || defined(__AVR_ATtiny2313__) \
1679 || defined(__AVR_ATtiny2313A__) \
1680 || defined(__AVR_ATtiny4313__) \
1681 || defined(__AVR_ATtiny13__) \
1682 || defined(__AVR_ATtiny13A__) \
1683 || defined(__AVR_ATtiny43U__) \
1684 
1685 typedef enum
1686 {
1687  clock_div_1 = 0,
1688  clock_div_2 = 1,
1689  clock_div_4 = 2,
1690  clock_div_8 = 3,
1691  clock_div_16 = 4,
1692  clock_div_32 = 5,
1693  clock_div_64 = 6,
1694  clock_div_128 = 7,
1695  clock_div_256 = 8
1696 } clock_div_t;
1697 
1698 static __inline__ void clock_prescale_set(clock_div_t) __attribute__((__always_inline__));
1699 
1700 void clock_prescale_set(clock_div_t __x)
1701 {
1702  uint8_t __tmp = _BV(CLKPCE);
1703  __asm__ __volatile__ (
1704  "in __tmp_reg__,__SREG__" "\n\t"
1705  "cli" "\n\t"
1706  "out %1, %0" "\n\t"
1707  "out %1, %2" "\n\t"
1708  "out __SREG__, __tmp_reg__"
1709  : /* no outputs */
1710  : "d" (__tmp),
1711  "I" (_SFR_IO_ADDR(CLKPR)),
1712  "d" (__x)
1713  : "r0");
1714 }
1715 
1716 
1717 #define clock_prescale_get() (clock_div_t)(CLKPR & (uint8_t)((1<<CLKPS0)|(1<<CLKPS1)|(1<<CLKPS2)|(1<<CLKPS3)))
1718 
1719 #elif defined(__AVR_ATmega64__) \
1720 || defined(__AVR_ATmega103__) \
1721 || defined(__AVR_ATmega128__)
1722 
1723 //Enum is declared for code compatibility
1724 typedef enum
1725 {
1726  clock_div_1 = 1,
1727  clock_div_2 = 2,
1728  clock_div_4 = 4,
1729  clock_div_8 = 8,
1730  clock_div_16 = 16,
1731  clock_div_32 = 32,
1732  clock_div_64 = 64,
1733  clock_div_128 = 128
1734 } clock_div_t;
1735 
1736 static __inline__ void clock_prescale_set(clock_div_t) __attribute__((__always_inline__));
1737 
1738 void clock_prescale_set(clock_div_t __x)
1739 {
1740  if((__x <= 0) || (__x > 129))
1741  {
1742  return;//Invalid value.
1743  }
1744  else
1745  {
1746  uint8_t __tmp = 0;
1747  //Algo explained:
1748  //1 - Clear XDIV in order for it to accept a new value (actually only
1749  // XDIVEN need to be cleared, but clearing XDIV is faster than
1750  // read-modify-write since we will rewrite XDIV later anyway)
1751  //2 - wait 8 clock cycle for stability, see datasheet erreta
1752  //3 - Exist if requested prescaller is 1
1753  //4 - Calculate XDIV6..0 value = 129 - __x
1754  //5 - Set XDIVEN bit in calculated value
1755  //6 - write XDIV with calculated value
1756  //7 - wait 8 clock cycle for stability, see datasheet erreta
1757  __asm__ __volatile__ (
1758  "in __tmp_reg__,__SREG__" "\n\t"
1759  "cli" "\n\t"
1760  "out %1, __zero_reg__" "\n\t"
1761  "nop" "\n\t"
1762  "nop" "\n\t"
1763  "nop" "\n\t"
1764  "nop" "\n\t"
1765  "nop" "\n\t"
1766  "nop" "\n\t"
1767  "nop" "\n\t"
1768  "nop" "\n\t"
1769  "cpi %0, 0x01" "\n\t"
1770  "breq L_%=" "\n\t"
1771  "ldi %2, 0x81" "\n\t" //129
1772  "sub %2, %0" "\n\t"
1773  "ori %2, 0x80" "\n\t" //128
1774  "out %1, %2" "\n\t"
1775  "nop" "\n\t"
1776  "nop" "\n\t"
1777  "nop" "\n\t"
1778  "nop" "\n\t"
1779  "nop" "\n\t"
1780  "nop" "\n\t"
1781  "nop" "\n\t"
1782  "nop" "\n\t"
1783  "L_%=: " "out __SREG__, __tmp_reg__"
1784  : /* no outputs */
1785  :"d" (__x),
1786  "I" (_SFR_IO_ADDR(XDIV)),
1787  "d" (__tmp)
1788  : "r0");
1789  }
1790 }
1791 
1792 static __inline__ clock_div_t clock_prescale_get(void) __attribute__((__always_inline__));
1793 
1794 clock_div_t clock_prescale_get(void)
1795 {
1796  if(bit_is_clear(XDIV, XDIVEN))
1797  {
1798  return 1;
1799  }
1800  else
1801  {
1802  return (clock_div_t)(129 - (XDIV & 0x7F));
1803  }
1804 }
1805 
1806 #elif defined(__AVR_ATtiny4__) \
1807 || defined(__AVR_ATtiny5__) \
1808 || defined(__AVR_ATtiny9__) \
1809 || defined(__AVR_ATtiny10__) \
1810 || defined(__AVR_ATtiny20__) \
1811 || defined(__AVR_ATtiny40__) \
1812 
1813 typedef enum
1814 {
1815  clock_div_1 = 0,
1816  clock_div_2 = 1,
1817  clock_div_4 = 2,
1818  clock_div_8 = 3,
1819  clock_div_16 = 4,
1820  clock_div_32 = 5,
1821  clock_div_64 = 6,
1822  clock_div_128 = 7,
1823  clock_div_256 = 8
1824 } clock_div_t;
1825 
1826 static __inline__ void clock_prescale_set(clock_div_t) __attribute__((__always_inline__));
1827 
1828 void clock_prescale_set(clock_div_t __x)
1829 {
1830  uint8_t __tmp = 0xD8;
1831  __asm__ __volatile__ (
1832  "in __tmp_reg__,__SREG__" "\n\t"
1833  "cli" "\n\t"
1834  "out %1, %0" "\n\t"
1835  "out %2, %3" "\n\t"
1836  "out __SREG__, __tmp_reg__"
1837  : /* no outputs */
1838  : "d" (__tmp),
1839  "I" (_SFR_IO_ADDR(CCP)),
1840  "I" (_SFR_IO_ADDR(CLKPSR)),
1841  "d" (__x)
1842  : "r16");
1843 }
1844 
1845 #define clock_prescale_get() (clock_div_t)(CLKPSR & (uint8_t)((1<<CLKPS0)|(1<<CLKPS1)|(1<<CLKPS2)|(1<<CLKPS3)))
1846 
1847 #endif
1848 
1849 #endif /* _AVR_POWER_H_ */
#define clock_prescale_get()
Definition: power.h:1476
static __inline void __attribute__((__always_inline__)) __power_all_enable()
Definition: power.h:1148
#define bit_is_clear(sfr, bit)
Definition: sfr_defs.h:245
unsigned char uint8_t
Definition: stdint.h:83
void clock_prescale_set(clock_div_t __x)
Definition: power.h:1451
#define _BV(bit)
Definition: sfr_defs.h:208