avr-libc  2.0.0
Standard C library for AVR-GCC

AVR Libc Home Page

AVRs

AVR Libc Development Pages

Main Page

User Manual

Library Reference

FAQ

Example Projects

boot.h
Go to the documentation of this file.
1 /* Copyright (c) 2002,2003,2004,2005,2006,2007,2008,2009 Eric B. Weddington
2  All rights reserved.
3 
4  Redistribution and use in source and binary forms, with or without
5  modification, are permitted provided that the following conditions are met:
6 
7  * Redistributions of source code must retain the above copyright
8  notice, this list of conditions and the following disclaimer.
9  * Redistributions in binary form must reproduce the above copyright
10  notice, this list of conditions and the following disclaimer in
11  the documentation and/or other materials provided with the
12  distribution.
13  * Neither the name of the copyright holders nor the names of
14  contributors may be used to endorse or promote products derived
15  from this software without specific prior written permission.
16 
17  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
18  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
21  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
22  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
23  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
24  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
25  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
26  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
27  POSSIBILITY OF SUCH DAMAGE. */
28 
29 /* $Id: boot.h 2503 2016-02-07 22:59:47Z joerg_wunsch $ */
30 
31 #ifndef _AVR_BOOT_H_
32 #define _AVR_BOOT_H_ 1
33 
34 /** \file */
35 /** \defgroup avr_boot <avr/boot.h>: Bootloader Support Utilities
36  \code
37  #include <avr/io.h>
38  #include <avr/boot.h>
39  \endcode
40 
41  The macros in this module provide a C language interface to the
42  bootloader support functionality of certain AVR processors. These
43  macros are designed to work with all sizes of flash memory.
44 
45  Global interrupts are not automatically disabled for these macros. It
46  is left up to the programmer to do this. See the code example below.
47  Also see the processor datasheet for caveats on having global interrupts
48  enabled during writing of the Flash.
49 
50  \note Not all AVR processors provide bootloader support. See your
51  processor datasheet to see if it provides bootloader support.
52 
53  \todo From email with Marek: On smaller devices (all except ATmega64/128),
54  __SPM_REG is in the I/O space, accessible with the shorter "in" and "out"
55  instructions - since the boot loader has a limited size, this could be an
56  important optimization.
57 
58  \par API Usage Example
59  The following code shows typical usage of the boot API.
60 
61  \code
62  #include <inttypes.h>
63  #include <avr/interrupt.h>
64  #include <avr/pgmspace.h>
65 
66  void boot_program_page (uint32_t page, uint8_t *buf)
67  {
68  uint16_t i;
69  uint8_t sreg;
70 
71  // Disable interrupts.
72 
73  sreg = SREG;
74  cli();
75 
76  eeprom_busy_wait ();
77 
78  boot_page_erase (page);
79  boot_spm_busy_wait (); // Wait until the memory is erased.
80 
81  for (i=0; i<SPM_PAGESIZE; i+=2)
82  {
83  // Set up little-endian word.
84 
85  uint16_t w = *buf++;
86  w += (*buf++) << 8;
87 
88  boot_page_fill (page + i, w);
89  }
90 
91  boot_page_write (page); // Store buffer in flash page.
92  boot_spm_busy_wait(); // Wait until the memory is written.
93 
94  // Reenable RWW-section again. We need this if we want to jump back
95  // to the application after bootloading.
96 
97  boot_rww_enable ();
98 
99  // Re-enable interrupts (if they were ever enabled).
100 
101  SREG = sreg;
102  }\endcode */
103 
104 #include <avr/eeprom.h>
105 #include <avr/io.h>
106 #include <inttypes.h>
107 #include <limits.h>
108 
109 /* Check for SPM Control Register in processor. */
110 #if defined (SPMCSR)
111 # define __SPM_REG SPMCSR
112 #else
113 # if defined (SPMCR)
114 # define __SPM_REG SPMCR
115 # else
116 # error AVR processor does not provide bootloader support!
117 # endif
118 #endif
119 
120 
121 /* Check for SPM Enable bit. */
122 #if defined(SPMEN)
123 # define __SPM_ENABLE SPMEN
124 #elif defined(SELFPRGEN)
125 # define __SPM_ENABLE SELFPRGEN
126 #else
127 # error Cannot find SPM Enable bit definition!
128 #endif
129 
130 /** \ingroup avr_boot
131  \def BOOTLOADER_SECTION
132 
133  Used to declare a function or variable to be placed into a
134  new section called .bootloader. This section and its contents
135  can then be relocated to any address (such as the bootloader
136  NRWW area) at link-time. */
137 
138 #define BOOTLOADER_SECTION __attribute__ ((section (".bootloader")))
139 
140 #ifndef __DOXYGEN__
141 /* Create common bit definitions. */
142 #ifdef ASB
143 #define __COMMON_ASB ASB
144 #else
145 #define __COMMON_ASB RWWSB
146 #endif
147 
148 #ifdef ASRE
149 #define __COMMON_ASRE ASRE
150 #else
151 #define __COMMON_ASRE RWWSRE
152 #endif
153 
154 /* Define the bit positions of the Boot Lock Bits. */
155 
156 #define BLB12 5
157 #define BLB11 4
158 #define BLB02 3
159 #define BLB01 2
160 #endif /* __DOXYGEN__ */
161 
162 /** \ingroup avr_boot
163  \def boot_spm_interrupt_enable()
164  Enable the SPM interrupt. */
165 
166 #define boot_spm_interrupt_enable() (__SPM_REG |= (uint8_t)_BV(SPMIE))
167 
168 /** \ingroup avr_boot
169  \def boot_spm_interrupt_disable()
170  Disable the SPM interrupt. */
171 
172 #define boot_spm_interrupt_disable() (__SPM_REG &= (uint8_t)~_BV(SPMIE))
173 
174 /** \ingroup avr_boot
175  \def boot_is_spm_interrupt()
176  Check if the SPM interrupt is enabled. */
177 
178 #define boot_is_spm_interrupt() (__SPM_REG & (uint8_t)_BV(SPMIE))
179 
180 /** \ingroup avr_boot
181  \def boot_rww_busy()
182  Check if the RWW section is busy. */
183 
184 #define boot_rww_busy() (__SPM_REG & (uint8_t)_BV(__COMMON_ASB))
185 
186 /** \ingroup avr_boot
187  \def boot_spm_busy()
188  Check if the SPM instruction is busy. */
189 
190 #define boot_spm_busy() (__SPM_REG & (uint8_t)_BV(__SPM_ENABLE))
191 
192 /** \ingroup avr_boot
193  \def boot_spm_busy_wait()
194  Wait while the SPM instruction is busy. */
195 
196 #define boot_spm_busy_wait() do{}while(boot_spm_busy())
197 
198 #ifndef __DOXYGEN__
199 #define __BOOT_PAGE_ERASE (_BV(__SPM_ENABLE) | _BV(PGERS))
200 #define __BOOT_PAGE_WRITE (_BV(__SPM_ENABLE) | _BV(PGWRT))
201 #define __BOOT_PAGE_FILL _BV(__SPM_ENABLE)
202 #define __BOOT_RWW_ENABLE (_BV(__SPM_ENABLE) | _BV(__COMMON_ASRE))
203 #if defined(BLBSET)
204 #define __BOOT_LOCK_BITS_SET (_BV(__SPM_ENABLE) | _BV(BLBSET))
205 #elif defined(RFLB) /* Some devices have RFLB defined instead of BLBSET. */
206 #define __BOOT_LOCK_BITS_SET (_BV(__SPM_ENABLE) | _BV(RFLB))
207 #endif
208 
209 #define __boot_page_fill_normal(address, data) \
210 (__extension__({ \
211  __asm__ __volatile__ \
212  ( \
213  "movw r0, %3\n\t" \
214  "sts %0, %1\n\t" \
215  "spm\n\t" \
216  "clr r1\n\t" \
217  : \
218  : "i" (_SFR_MEM_ADDR(__SPM_REG)), \
219  "r" ((uint8_t)(__BOOT_PAGE_FILL)), \
220  "z" ((uint16_t)(address)), \
221  "r" ((uint16_t)(data)) \
222  : "r0" \
223  ); \
224 }))
225 
226 #define __boot_page_fill_alternate(address, data)\
227 (__extension__({ \
228  __asm__ __volatile__ \
229  ( \
230  "movw r0, %3\n\t" \
231  "sts %0, %1\n\t" \
232  "spm\n\t" \
233  ".word 0xffff\n\t" \
234  "nop\n\t" \
235  "clr r1\n\t" \
236  : \
237  : "i" (_SFR_MEM_ADDR(__SPM_REG)), \
238  "r" ((uint8_t)(__BOOT_PAGE_FILL)), \
239  "z" ((uint16_t)(address)), \
240  "r" ((uint16_t)(data)) \
241  : "r0" \
242  ); \
243 }))
244 
245 #define __boot_page_fill_extended(address, data) \
246 (__extension__({ \
247  __asm__ __volatile__ \
248  ( \
249  "movw r0, %4\n\t" \
250  "movw r30, %A3\n\t" \
251  "sts %1, %C3\n\t" \
252  "sts %0, %2\n\t" \
253  "spm\n\t" \
254  "clr r1\n\t" \
255  : \
256  : "i" (_SFR_MEM_ADDR(__SPM_REG)), \
257  "i" (_SFR_MEM_ADDR(RAMPZ)), \
258  "r" ((uint8_t)(__BOOT_PAGE_FILL)), \
259  "r" ((uint32_t)(address)), \
260  "r" ((uint16_t)(data)) \
261  : "r0", "r30", "r31" \
262  ); \
263 }))
264 
265 #define __boot_page_erase_normal(address) \
266 (__extension__({ \
267  __asm__ __volatile__ \
268  ( \
269  "sts %0, %1\n\t" \
270  "spm\n\t" \
271  : \
272  : "i" (_SFR_MEM_ADDR(__SPM_REG)), \
273  "r" ((uint8_t)(__BOOT_PAGE_ERASE)), \
274  "z" ((uint16_t)(address)) \
275  ); \
276 }))
277 
278 #define __boot_page_erase_alternate(address) \
279 (__extension__({ \
280  __asm__ __volatile__ \
281  ( \
282  "sts %0, %1\n\t" \
283  "spm\n\t" \
284  ".word 0xffff\n\t" \
285  "nop\n\t" \
286  : \
287  : "i" (_SFR_MEM_ADDR(__SPM_REG)), \
288  "r" ((uint8_t)(__BOOT_PAGE_ERASE)), \
289  "z" ((uint16_t)(address)) \
290  ); \
291 }))
292 
293 #define __boot_page_erase_extended(address) \
294 (__extension__({ \
295  __asm__ __volatile__ \
296  ( \
297  "movw r30, %A3\n\t" \
298  "sts %1, %C3\n\t" \
299  "sts %0, %2\n\t" \
300  "spm\n\t" \
301  : \
302  : "i" (_SFR_MEM_ADDR(__SPM_REG)), \
303  "i" (_SFR_MEM_ADDR(RAMPZ)), \
304  "r" ((uint8_t)(__BOOT_PAGE_ERASE)), \
305  "r" ((uint32_t)(address)) \
306  : "r30", "r31" \
307  ); \
308 }))
309 
310 #define __boot_page_write_normal(address) \
311 (__extension__({ \
312  __asm__ __volatile__ \
313  ( \
314  "sts %0, %1\n\t" \
315  "spm\n\t" \
316  : \
317  : "i" (_SFR_MEM_ADDR(__SPM_REG)), \
318  "r" ((uint8_t)(__BOOT_PAGE_WRITE)), \
319  "z" ((uint16_t)(address)) \
320  ); \
321 }))
322 
323 #define __boot_page_write_alternate(address) \
324 (__extension__({ \
325  __asm__ __volatile__ \
326  ( \
327  "sts %0, %1\n\t" \
328  "spm\n\t" \
329  ".word 0xffff\n\t" \
330  "nop\n\t" \
331  : \
332  : "i" (_SFR_MEM_ADDR(__SPM_REG)), \
333  "r" ((uint8_t)(__BOOT_PAGE_WRITE)), \
334  "z" ((uint16_t)(address)) \
335  ); \
336 }))
337 
338 #define __boot_page_write_extended(address) \
339 (__extension__({ \
340  __asm__ __volatile__ \
341  ( \
342  "movw r30, %A3\n\t" \
343  "sts %1, %C3\n\t" \
344  "sts %0, %2\n\t" \
345  "spm\n\t" \
346  : \
347  : "i" (_SFR_MEM_ADDR(__SPM_REG)), \
348  "i" (_SFR_MEM_ADDR(RAMPZ)), \
349  "r" ((uint8_t)(__BOOT_PAGE_WRITE)), \
350  "r" ((uint32_t)(address)) \
351  : "r30", "r31" \
352  ); \
353 }))
354 
355 #define __boot_rww_enable() \
356 (__extension__({ \
357  __asm__ __volatile__ \
358  ( \
359  "sts %0, %1\n\t" \
360  "spm\n\t" \
361  : \
362  : "i" (_SFR_MEM_ADDR(__SPM_REG)), \
363  "r" ((uint8_t)(__BOOT_RWW_ENABLE)) \
364  ); \
365 }))
366 
367 #define __boot_rww_enable_alternate() \
368 (__extension__({ \
369  __asm__ __volatile__ \
370  ( \
371  "sts %0, %1\n\t" \
372  "spm\n\t" \
373  ".word 0xffff\n\t" \
374  "nop\n\t" \
375  : \
376  : "i" (_SFR_MEM_ADDR(__SPM_REG)), \
377  "r" ((uint8_t)(__BOOT_RWW_ENABLE)) \
378  ); \
379 }))
380 
381 /* From the mega16/mega128 data sheets (maybe others):
382 
383  Bits by SPM To set the Boot Loader Lock bits, write the desired data to
384  R0, write "X0001001" to SPMCR and execute SPM within four clock cycles
385  after writing SPMCR. The only accessible Lock bits are the Boot Lock bits
386  that may prevent the Application and Boot Loader section from any
387  software update by the MCU.
388 
389  If bits 5..2 in R0 are cleared (zero), the corresponding Boot Lock bit
390  will be programmed if an SPM instruction is executed within four cycles
391  after BLBSET and SPMEN (or SELFPRGEN) are set in SPMCR. The Z-pointer is
392  don't care during this operation, but for future compatibility it is
393  recommended to load the Z-pointer with $0001 (same as used for reading the
394  Lock bits). For future compatibility It is also recommended to set bits 7,
395  6, 1, and 0 in R0 to 1 when writing the Lock bits. When programming the
396  Lock bits the entire Flash can be read during the operation. */
397 
398 #define __boot_lock_bits_set(lock_bits) \
399 (__extension__({ \
400  uint8_t value = (uint8_t)(~(lock_bits)); \
401  __asm__ __volatile__ \
402  ( \
403  "ldi r30, 1\n\t" \
404  "ldi r31, 0\n\t" \
405  "mov r0, %2\n\t" \
406  "sts %0, %1\n\t" \
407  "spm\n\t" \
408  : \
409  : "i" (_SFR_MEM_ADDR(__SPM_REG)), \
410  "r" ((uint8_t)(__BOOT_LOCK_BITS_SET)), \
411  "r" (value) \
412  : "r0", "r30", "r31" \
413  ); \
414 }))
415 
416 #define __boot_lock_bits_set_alternate(lock_bits) \
417 (__extension__({ \
418  uint8_t value = (uint8_t)(~(lock_bits)); \
419  __asm__ __volatile__ \
420  ( \
421  "ldi r30, 1\n\t" \
422  "ldi r31, 0\n\t" \
423  "mov r0, %2\n\t" \
424  "sts %0, %1\n\t" \
425  "spm\n\t" \
426  ".word 0xffff\n\t" \
427  "nop\n\t" \
428  : \
429  : "i" (_SFR_MEM_ADDR(__SPM_REG)), \
430  "r" ((uint8_t)(__BOOT_LOCK_BITS_SET)), \
431  "r" (value) \
432  : "r0", "r30", "r31" \
433  ); \
434 }))
435 #endif /* __DOXYGEN__ */
436 
437 /*
438  Reading lock and fuse bits:
439 
440  Similarly to writing the lock bits above, set BLBSET and SPMEN (or
441  SELFPRGEN) bits in __SPMREG, and then (within four clock cycles) issue an
442  LPM instruction.
443 
444  Z address: contents:
445  0x0000 low fuse bits
446  0x0001 lock bits
447  0x0002 extended fuse bits
448  0x0003 high fuse bits
449 
450  Sounds confusing, doesn't it?
451 
452  Unlike the macros in pgmspace.h, no need to care for non-enhanced
453  cores here as these old cores do not provide SPM support anyway.
454  */
455 
456 /** \ingroup avr_boot
457  \def GET_LOW_FUSE_BITS
458  address to read the low fuse bits, using boot_lock_fuse_bits_get
459  */
460 #define GET_LOW_FUSE_BITS (0x0000)
461 /** \ingroup avr_boot
462  \def GET_LOCK_BITS
463  address to read the lock bits, using boot_lock_fuse_bits_get
464  */
465 #define GET_LOCK_BITS (0x0001)
466 /** \ingroup avr_boot
467  \def GET_EXTENDED_FUSE_BITS
468  address to read the extended fuse bits, using boot_lock_fuse_bits_get
469  */
470 #define GET_EXTENDED_FUSE_BITS (0x0002)
471 /** \ingroup avr_boot
472  \def GET_HIGH_FUSE_BITS
473  address to read the high fuse bits, using boot_lock_fuse_bits_get
474  */
475 #define GET_HIGH_FUSE_BITS (0x0003)
476 
477 /** \ingroup avr_boot
478  \def boot_lock_fuse_bits_get(address)
479 
480  Read the lock or fuse bits at \c address.
481 
482  Parameter \c address can be any of GET_LOW_FUSE_BITS,
483  GET_LOCK_BITS, GET_EXTENDED_FUSE_BITS, or GET_HIGH_FUSE_BITS.
484 
485  \note The lock and fuse bits returned are the physical values,
486  i.e. a bit returned as 0 means the corresponding fuse or lock bit
487  is programmed.
488  */
489 #define boot_lock_fuse_bits_get(address) \
490 (__extension__({ \
491  uint8_t __result; \
492  __asm__ __volatile__ \
493  ( \
494  "sts %1, %2\n\t" \
495  "lpm %0, Z\n\t" \
496  : "=r" (__result) \
497  : "i" (_SFR_MEM_ADDR(__SPM_REG)), \
498  "r" ((uint8_t)(__BOOT_LOCK_BITS_SET)), \
499  "z" ((uint16_t)(address)) \
500  ); \
501  __result; \
502 }))
503 
504 #ifndef __DOXYGEN__
505 #define __BOOT_SIGROW_READ (_BV(__SPM_ENABLE) | _BV(SIGRD))
506 #endif
507 /** \ingroup avr_boot
508  \def boot_signature_byte_get(address)
509 
510  Read the Signature Row byte at \c address. For some MCU types,
511  this function can also retrieve the factory-stored oscillator
512  calibration bytes.
513 
514  Parameter \c address can be 0-0x1f as documented by the datasheet.
515  \note The values are MCU type dependent.
516 */
517 
518 #define boot_signature_byte_get(addr) \
519 (__extension__({ \
520  uint8_t __result; \
521  __asm__ __volatile__ \
522  ( \
523  "sts %1, %2\n\t" \
524  "lpm %0, Z" "\n\t" \
525  : "=r" (__result) \
526  : "i" (_SFR_MEM_ADDR(__SPM_REG)), \
527  "r" ((uint8_t)(__BOOT_SIGROW_READ)), \
528  "z" ((uint16_t)(addr)) \
529  ); \
530  __result; \
531 }))
532 
533 /** \ingroup avr_boot
534  \def boot_page_fill(address, data)
535 
536  Fill the bootloader temporary page buffer for flash
537  address with data word.
538 
539  \note The address is a byte address. The data is a word. The AVR
540  writes data to the buffer a word at a time, but addresses the buffer
541  per byte! So, increment your address by 2 between calls, and send 2
542  data bytes in a word format! The LSB of the data is written to the lower
543  address; the MSB of the data is written to the higher address.*/
544 
545 /** \ingroup avr_boot
546  \def boot_page_erase(address)
547 
548  Erase the flash page that contains address.
549 
550  \note address is a byte address in flash, not a word address. */
551 
552 /** \ingroup avr_boot
553  \def boot_page_write(address)
554 
555  Write the bootloader temporary page buffer
556  to flash page that contains address.
557 
558  \note address is a byte address in flash, not a word address. */
559 
560 /** \ingroup avr_boot
561  \def boot_rww_enable()
562 
563  Enable the Read-While-Write memory section. */
564 
565 /** \ingroup avr_boot
566  \def boot_lock_bits_set(lock_bits)
567 
568  Set the bootloader lock bits.
569 
570  \param lock_bits A mask of which Boot Loader Lock Bits to set.
571 
572  \note In this context, a 'set bit' will be written to a zero value.
573  Note also that only BLBxx bits can be programmed by this command.
574 
575  For example, to disallow the SPM instruction from writing to the Boot
576  Loader memory section of flash, you would use this macro as such:
577 
578  \code
579  boot_lock_bits_set (_BV (BLB11));
580  \endcode
581 
582  \note Like any lock bits, the Boot Loader Lock Bits, once set,
583  cannot be cleared again except by a chip erase which will in turn
584  also erase the boot loader itself. */
585 
586 /* Normal versions of the macros use 16-bit addresses.
587  Extended versions of the macros use 32-bit addresses.
588  Alternate versions of the macros use 16-bit addresses and require special
589  instruction sequences after LPM.
590 
591  FLASHEND is defined in the ioXXXX.h file.
592  USHRT_MAX is defined in <limits.h>. */
593 
594 #if defined(__AVR_ATmega161__) || defined(__AVR_ATmega163__) \
595  || defined(__AVR_ATmega323__)
596 
597 /* Alternate: ATmega161/163/323 and 16 bit address */
598 #define boot_page_fill(address, data) __boot_page_fill_alternate(address, data)
599 #define boot_page_erase(address) __boot_page_erase_alternate(address)
600 #define boot_page_write(address) __boot_page_write_alternate(address)
601 #define boot_rww_enable() __boot_rww_enable_alternate()
602 #define boot_lock_bits_set(lock_bits) __boot_lock_bits_set_alternate(lock_bits)
603 
604 #elif (FLASHEND > USHRT_MAX)
605 
606 /* Extended: >16 bit address */
607 #define boot_page_fill(address, data) __boot_page_fill_extended(address, data)
608 #define boot_page_erase(address) __boot_page_erase_extended(address)
609 #define boot_page_write(address) __boot_page_write_extended(address)
610 #define boot_rww_enable() __boot_rww_enable()
611 #define boot_lock_bits_set(lock_bits) __boot_lock_bits_set(lock_bits)
612 
613 #else
614 
615 /* Normal: 16 bit address */
616 #define boot_page_fill(address, data) __boot_page_fill_normal(address, data)
617 #define boot_page_erase(address) __boot_page_erase_normal(address)
618 #define boot_page_write(address) __boot_page_write_normal(address)
619 #define boot_rww_enable() __boot_rww_enable()
620 #define boot_lock_bits_set(lock_bits) __boot_lock_bits_set(lock_bits)
621 
622 #endif
623 
624 /** \ingroup avr_boot
625 
626  Same as boot_page_fill() except it waits for eeprom and spm operations to
627  complete before filling the page. */
628 
629 #define boot_page_fill_safe(address, data) \
630 do { \
631  boot_spm_busy_wait(); \
632  eeprom_busy_wait(); \
633  boot_page_fill(address, data); \
634 } while (0)
635 
636 /** \ingroup avr_boot
637 
638  Same as boot_page_erase() except it waits for eeprom and spm operations to
639  complete before erasing the page. */
640 
641 #define boot_page_erase_safe(address) \
642 do { \
643  boot_spm_busy_wait(); \
644  eeprom_busy_wait(); \
645  boot_page_erase (address); \
646 } while (0)
647 
648 /** \ingroup avr_boot
649 
650  Same as boot_page_write() except it waits for eeprom and spm operations to
651  complete before writing the page. */
652 
653 #define boot_page_write_safe(address) \
654 do { \
655  boot_spm_busy_wait(); \
656  eeprom_busy_wait(); \
657  boot_page_write (address); \
658 } while (0)
659 
660 /** \ingroup avr_boot
661 
662  Same as boot_rww_enable() except waits for eeprom and spm operations to
663  complete before enabling the RWW mameory. */
664 
665 #define boot_rww_enable_safe() \
666 do { \
667  boot_spm_busy_wait(); \
668  eeprom_busy_wait(); \
669  boot_rww_enable(); \
670 } while (0)
671 
672 /** \ingroup avr_boot
673 
674  Same as boot_lock_bits_set() except waits for eeprom and spm operations to
675  complete before setting the lock bits. */
676 
677 #define boot_lock_bits_set_safe(lock_bits) \
678 do { \
679  boot_spm_busy_wait(); \
680  eeprom_busy_wait(); \
681  boot_lock_bits_set (lock_bits); \
682 } while (0)
683 
684 #endif /* _AVR_BOOT_H_ */